Simplex Visible Notification Appliances, Ceiling Mount Visible Notification Appliances, Selectable as Free-Run or Synchronized

CSFM Listed NYC Acceptance Notification Appliances Mount Visible Notification Appliances as Free Run or Synchronized flashtube visible notification appliance UL listed to Standard 1971 Models are available with 15 30 or 110 candela 24 VDC operation with switch selection for free run synchronized flash rate also compatible with strobe operation Compatible with ADA requirements Strobe candela rating is clearly indicated on reflector Diode polarized input for connection to reverse polarity Notification Appliance Circuit NAC Rugged high impact flame retardant thermoplastic flash rate mode for use with Simplex fire alarm control panel NACs that provide synchronization or SmartSync notification two wire control Separate Synchronization modules for Class B or A operation SmartSync Control Module 4905 9938 options Red with white White without lettering Red wire guard is available 4904 Series ceiling mount visible appliances provide symmetrical light output key axis directions by utilizing a compound reflector design The lens assembly fits into its housing providing a high integrity appliance that is impact and vandal resistant suitable for a variety of applications Selection selection of ceiling mount visible notification is dependent on occupancy location local and proper applications of the National Fire Code NFPA 72 ANSI A117.1 the appropriate building code BOCA ICBO or SBCCI and the guidelines of the Americans with Disabilities ADA Refer to page 2 for guard listing This product has been approved by the California State Marshal CSFM pursuant to Section 13144.1 of the California Health and Safety See CSFM Listing 7125 0026 248 for allowable values and or conditions material presented in this document Accepted for use City of New York of Buildings MEA35 93E This product was not ULC listed or FM approved of document revision date Additional listings may be applicable contact Simplex for latest status Additional listings may be applicable contact your local Simplex supplier for the latest status Listings and approvals under Simplex Time Co are the property of Tyco Fire Protection Products Mount Strobes are Available in Red with Lettering and White without Lettering view and front view shown Strobes multiple strobes and their reflections can be from one location synchronized flashes reduce the of photo sensitive reactions as well as the and possible distraction of random flashing If output NACs are not available two wire circuit Synchronization Modules can be used to control flash strobes Refer to data sheet for additional details Free run model will flash in a free run mode when connected to a NAC Control Reference selected for synchronized flash mode these strobes be controlled by either a synch strobe control or by two wire horn strobe control two wire horn strobe control as well as strobe only control is available from 4006 4007ES Hybrid 4008 4010 4010ES 4100ES 4100U Fire Alarm Control Panels refer to product data sheets for details 4009 IDNet NAC Extenders refer to data sheet SmartSync Control Module SCM 4905 9938 which a SmartSync interface to conventional NACs to data sheet S4905 0003 for additional details SmartSync compatible products include horns and combination horn strobe notification appliances 11 2014 Product Selection Mount Visible Notification Appliances Strobes Output Rating Number cd cd cd Color with white lettering without lettering mount adapter plate zinc plated see illustration below Modules Refer to data sheet S4905 0003 for additional details Flash Module B operation Flash Module A operation encapsulated with in out AWG 0.82 mm2 wire leads rated 2 A NAC requires 5 mA for power Control Module Class A or Class B installs in 4 square box Guard see illustration below Wire Guard UL listed by Space Age Electronics Inc x 3 1 8 mm x 79 mm x 2 7 16 x 13 16 mm x 62 mm x 20 mm x 4 1 8 x 1 1 4 D mm x 105 mm x 32 mm x 4 3 8 x 2 7 8 deep mm x 111 mm x 73 mm Surface Semi Flush Installation Reference box 1 1 2 38 mm deep 650 or equal or single gang 2 1 2 64 mm deep RACO 519 equal supplied by others gang box Wiremold 2 1 4 57 mm deep by others Adapter Plate for surface mount with box optional for semi flush mount strobe with lettering for reference mount strobe without shown for reference mount strobe with optional wire guard 11 2014 Specifications Specifications Voltage Range Dimensions including lens Range Range 24 VDC see Note 1 below x 2 5 16 x 2 5 8 D 121 mm x 75 mm x 67 mm to 122 F 0 to 50 C to 93 non condensing at 100 F 38 C blocks for 18 AWG to 12 AWG 0.82 mm2 to 3.31 mm2 two per terminal for in out wiring Specifications Rate and Synchronized NAC Loading RMS Current Rating per Strobe Output Note 2 below Currents other voltages VDC VDC Hz with up to 35 synchronized strobes maximum per NAC cd mA mA mA cd mA mA mA cd mA mA mA 24 VDC refers to the voltage range of 16 to 33 VDC per UL Standard 1971 Signaling Devices for the Impaired changes effective May 1 2004 This voltage range is the absolute operating range Operation outside this range may cause permanent damage to the appliance Please note that 16 VDC is the lowest operating voltage is allowed at the last appliance on the NAC under worst case conditions The maximum RMS current listed is the device nameplate rating Strobe designs are constant wattage and the maximum current rating occurs at the lowest allowable operating voltage RMS is root mean square and refers to the value of a varying current waveform T bar Mounting Reference with clips and screws No 512 supplied by others box 1 1 2 38 mm RACO 650 or equal by others 11 2014 SIMPLEX and the product names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm and Code are registered trademarks of the National Fire Protection Association NFPA Fire Protection Products Westminster MA 01441 0001 USA 11 2014 2014 Tyco Fire Protection Products All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice