Home » Solidyne M2 Data Sheet
File preview
Click the button below to download immediately for free
Download “Solidyne M2 Data Sheet” Solidyne_M2_Data_Sheet.pdf – Downloaded 0 times – 827 KB
Show text preview
M2 – Universal Controller Document 1 01/2005 Cont Environment 40 to 140 F (4 to 60 C) * 10-90% Relative, noncondensing ** Storage Temperature: -10 to 150 F (-23 to 66 C) Storage Humidity: 0-95% Relative, noncondensing Communication RS-485 3 conductor, 18 guage, shielded, up to 8000ft max. Rate (selectable): 57.6k, 38.4k, 19.2k, 9600, 2400, 1200 Backup 7 year lithium Dimensions 70 mm (2.75 in) 78 mm (3.0 in) 160 mm (6.3 in) Holes: 148.5 mm (5.85 in) Center to Center 1.2 lb Approvals Device: Pending is in the process of UL/CSA approval for the entire M2 family and associated modules. Please use Solidyne UL number E76576 24G9 for all references to agency approvals. Stand Alone Controller M2 is the next generation Universal Controller including real time clock and day calendar. Offering 100% compatibility with controllers, ICMS software and i3 networks, the M2 a seamless upgrade path for existing projects. (8) universal inputs and (8) analog outputs built-in, M2 can be expanded to include (4) or (8) digital using plug-in modules. This modular provides customization of the M2 for any of application. Requirements Voltage: 23 to 28 VAC 50/60 Hz 1.7 VA (without optional plug-in modules) 10.3 VA (all optional plug-in modules used) Voltage Fuse: Resetable fuse rated at 1.1A at 24VAC Inputs: (8) Analog Inputs. be independently configured for thermistor*, digital, or 4-20mA. Thermistor Inputs are 3k, 10k, 100kohm thermistor, Type 3. Outputs: (8) 0-10vdc Analog Outputs*. Can drive down to 10Kohm loads at 10vdc Outputs: to Eight (8) Digital Outputs*. Eight (8) digital outputs would require two (2) plug-in relay modules – REV 1 – 01/2005 Solidyne Corporation 4215 Kirchoff Rd. Rolling Meadows IL 60008 (800) 648-3980 www.solidyne.com MODULE M2-R4) MODULE M2-R4) ON FIG. 1 FOR SELECTIONS [COM] [COM] [COM] [COM] HOT NEUTRAL RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION INPUT #1 INPUT #2 INPUT #3 INPUT #4 INPUT #5 INPUT #6 INPUT #7 INPUT #8 OUTPUT TRANSDUCER POWER 25mA MAX OUTPUT #1 OUTPUT #2 OUTPUT #3 OUTPUT #4 OUTPUT #5 OR IO COMMON (JUMPER SELECTABLE) OUTPUT #6 OR IO COMMON (JUMPER SELECTABLE) OUTPUT #7 OR IO COMMON (JUMPER SELECTABLE) OUTPUT #8 OR IO COMMON (JUMPER SELECTABLE) AND OUTPUT COMMON Installation Notes: sure that BATT JUMPER is place before powering unit with on board POWER unit is powered, ON LED flash 1 second on, 1 off continuously when is operating This flashing as a heartbeat and that the unit on. It will not flash or when unit is off. inserting or removing modules or display such as DU-1, M2 must powered OFF or damage will is internally protected over current by a 1.1 self resetting fuse. will protect the 24VAC powering the M2 being damaged due to the failing internally. +8v output is used for low power Solidyne 1 INPUT JUMPERS (NOTE 2) INPUT LED (NOTE 3
M2 – Universal Controller Document 1 01/2005 Cont Environment 40 to 140 F (4 to 60 C) * 10-90% Relative, noncondensing ** Storage Temperature: -10 to 150 F (-23 to 66 C) Storage Humidity: 0-95% Relative, noncondensing Communication RS-485 3 conductor, 18 guage, shielded, up to 8000ft max. Rate (selectable): 57.6k, 38.4k, 19.2k, 9600, 2400, 1200 Backup 7 year lithium Dimensions 70 mm (2.75 in) 78 mm (3.0 in) 160 mm (6.3 in) Holes: 148.5 mm (5.85 in) Center to Center 1.2 lb Approvals Device: Pending is in the process of UL/CSA approval for the entire M2 family and associated modules. Please use Solidyne UL number E76576 24G9 for all references to agency approvals. Stand Alone Controller M2 is the next generation Universal Controller including real time clock and day calendar. Offering 100% compatibility with controllers, ICMS software and i3 networks, the M2 a seamless upgrade path for existing projects. (8) universal inputs and (8) analog outputs built-in, M2 can be expanded to include (4) or (8) digital using plug-in modules. This modular provides customization of the M2 for any of application. Requirements Voltage: 23 to 28 VAC 50/60 Hz 1.7 VA (without optional plug-in modules) 10.3 VA (all optional plug-in modules used) Voltage Fuse: Resetable fuse rated at 1.1A at 24VAC Inputs: (8) Analog Inputs. be independently configured for thermistor*, digital, or 4-20mA. Thermistor Inputs are 3k, 10k, 100kohm thermistor, Type 3. Outputs: (8) 0-10vdc Analog Outputs*. Can drive down to 10Kohm loads at 10vdc Outputs: to Eight (8) Digital Outputs*. Eight (8) digital outputs would require two (2) plug-in relay modules – REV 1 – 01/2005 Solidyne Corporation 4215 Kirchoff Rd. Rolling Meadows IL 60008 (800) 648-3980 www.solidyne.com MODULE M2-R4) MODULE M2-R4) ON FIG. 1 FOR SELECTIONS [COM] [COM] [COM] [COM] HOT NEUTRAL RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION INPUT #1 INPUT #2 INPUT #3 INPUT #4 INPUT #5 INPUT #6 INPUT #7 INPUT #8 OUTPUT TRANSDUCER POWER 25mA MAX OUTPUT #1 OUTPUT #2 OUTPUT #3 OUTPUT #4 OUTPUT #5 OR IO COMMON (JUMPER SELECTABLE) OUTPUT #6 OR IO COMMON (JUMPER SELECTABLE) OUTPUT #7 OR IO COMMON (JUMPER SELECTABLE) OUTPUT #8 OR IO COMMON (JUMPER SELECTABLE) AND OUTPUT COMMON Installation Notes: sure that BATT JUMPER is place before powering unit with on board POWER unit is powered, ON LED flash 1 second on, 1 off continuously when is operating This flashing as a heartbeat and that the unit on. It will not flash or when unit is off. inserting or removing modules or display such as DU-1, M2 must powered OFF or damage will is internally protected over current by a 1.1 self resetting fuse. will protect the 24VAC powering the M2 being damaged due to the failing internally. +8v output is used for low power Solidyne 1 INPUT JUMPERS (NOTE 2) INPUT LED (NOTE 3