Home » Solidyne M2-R4 Data Sheet
File preview
Click the button below to download immediately for free
Download “Solidyne M2-R4 Data Sheet” Solidyne_M2-R4_Data_Sheet.pdf – Downloaded 0 times – 734 KB
Show text preview
M2-R4 4 Relay Output Module Document 2 11/2004 1 2 3 4 View View Switch LED Plug-In the module into female mating stability off power to the or M2V before this module Mating on Plug-In Relay Module M2 Plug-In Relay Module is a add-in relay card that the M2 controller family 4 relay outputs. These are designated as outputs 1 through 4 or outputs through 8 and are double pole double throw (DPDT) can be used as normally open (NO) or normally (NC). The module also has HOA switching on each of the four relays as well as a status When the HOA switch is in HAND mode, the LED will have a long ON blink and a very short blink. If the HOA switch is in OFF mode, the LED have a long OFF blink and a short ON blink. In Auto the LED will stay ON or OFF depending on the status. The M2-R4 module can be used on both the M2 and M2V The terminal block on this module has labeled terminals 26, 37 and 48. For example, the first relay of the M2-R4 can be output 1 or 5 depending on where the module is inserted. the module is inserted into the Relay Module Port on the M2V, will designate Relay 1 as the controller Output 5. Then with a marker, the 1 of the 15 label can be blacked out to only show 5. Continue this process for outputs 6, 7 and 8 so that the relay shows the correct output labels. On an M2, two M2-R4 can be used simultaneously to provide outputs 1 through 8. the first M2-R4 module, with a black marker, mark out the 5, 6, 7 and 8 and for the second M2-R4 module, mark out numbers 1, 2, 3 and 4. LED Specifications Ratings: 5A at 24VAC (NO) 3A at 24VAC (NC) Load: 10mA at 6VAC Duty Cycle: 20 cycles per minute Contact Life: 500,000 at 5A (NO) 200,000 at 3A (NC) Consumption: 8.5VA (all relays energized) should not be used to switch more than 24VAC Environment 40 to 140 F (4 to 60 C) * 10-90% Relative, noncondensing ** Storage Temperature: -10 to 150 F (-23 to 66 C) Storage Humidity: 0-95% Relative, noncondensing – REV 2 – 11/2004 Corporation 4215 Kirchoff Rd. Rolling Meadows IL 60008 (800) 648-3980 www.solidyne.com
M2-R4 4 Relay Output Module Document 2 11/2004 1 2 3 4 View View Switch LED Plug-In the module into female mating stability off power to the or M2V before this module Mating on Plug-In Relay Module M2 Plug-In Relay Module is a add-in relay card that the M2 controller family 4 relay outputs. These are designated as outputs 1 through 4 or outputs through 8 and are double pole double throw (DPDT) can be used as normally open (NO) or normally (NC). The module also has HOA switching on each of the four relays as well as a status When the HOA switch is in HAND mode, the LED will have a long ON blink and a very short blink. If the HOA switch is in OFF mode, the LED have a long OFF blink and a short ON blink. In Auto the LED will stay ON or OFF depending on the status. The M2-R4 module can be used on both the M2 and M2V The terminal block on this module has labeled terminals 26, 37 and 48. For example, the first relay of the M2-R4 can be output 1 or 5 depending on where the module is inserted. the module is inserted into the Relay Module Port on the M2V, will designate Relay 1 as the controller Output 5. Then with a marker, the 1 of the 15 label can be blacked out to only show 5. Continue this process for outputs 6, 7 and 8 so that the relay shows the correct output labels. On an M2, two M2-R4 can be used simultaneously to provide outputs 1 through 8. the first M2-R4 module, with a black marker, mark out the 5, 6, 7 and 8 and for the second M2-R4 module, mark out numbers 1, 2, 3 and 4. LED Specifications Ratings: 5A at 24VAC (NO) 3A at 24VAC (NC) Load: 10mA at 6VAC Duty Cycle: 20 cycles per minute Contact Life: 500,000 at 5A (NO) 200,000 at 3A (NC) Consumption: 8.5VA (all relays energized) should not be used to switch more than 24VAC Environment 40 to 140 F (4 to 60 C) * 10-90% Relative, noncondensing ** Storage Temperature: -10 to 150 F (-23 to 66 C) Storage Humidity: 0-95% Relative, noncondensing – REV 2 – 11/2004 Corporation 4215 Kirchoff Rd. Rolling Meadows IL 60008 (800) 648-3980 www.solidyne.com