Home » Solidyne M2V Data Sheet
File preview
Click the button below to download immediately for free
Download “Solidyne M2V Data Sheet” Solidyne_M2V_Data_Sheet.pdf – Downloaded 0 times – 785 KB
Show text preview
M2V – VAV Controller Document 3 01/2005 Cont Environment 40 to 140 F (4 to 60 C) * 10-90% Relative, noncondensing ** Storage Temperature: -10 to 150 F (-23 to 66 C) Storage Humidity: 0-95% Relative, noncondensing Communication RS-485 3 conductor, 18 guage, shielded, up to 8000ft max. Rate (selectable): 57.6k, 38.4k, 19.2k, 9600, 2400, 1200 Backup 7 year lithium Dimensions 70 mm (2.75 in) 78 mm (3.0 in) 160 mm (6.3 in) Holes: 148.5 mm (5.85 in) Center to Center 1.2 lb Approvals Device: Pending Air Volume Controller M2V is the next generation Variable Air and Temperature Controller. Plug-in modules available for flow sensing, actuator and external control. These plug-in modules allow easy of the M2V for any type of VAV This peer-to-peer, stand alone or VAV controller can control ANY type of air volume unit. Requirements Inputs: Temperature* Temperature* Zone Temperature Setpoint Adjust (ZTS-A) Main Damper Actuator Position Auxiliary Damper Actuator Position Temperature Inputs are 3k, 10k, 100kohm thermistor, Type 3. Outputs: Actuator Output 0-10vdc* Actuator Output 0-10vdc* Can drive down to 10Kohm loads at 10vdc Voltage: 23 to 28 VAC 50/60 Hz 1.7 VA (without optional plug-in modules) 10.3 VA (all optional plug-in modules used) Voltage Fuse: Resetable fuse rated at 1.1A at 24VAC is in the process of UL/CSA approval for the entire M2 family and associated modules. Please use Solidyne UL number E76576 24G9 for all references to agency approvals. – REV 3 – 01/2005 Solidyne Corporation 4215 Kirchoff Rd. Rolling Meadows IL 60008 (800) 648-3980 www.solidyne.com MODULE M2-R4) M2V-FMD) M2V-FMD) HOT NEUTRAL RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION TEMP COMMON TEMP 3/10/100K (INPUT #2) COMMON TEMP 3/10/100K (INPUT #1) ADJUSTMENT POT (INPUT #3) TRANSDUCER POWER 25mA MAX VDC INPUT/OUTPUT COMMON VDC INPUT (INPUT #8) VDC OUTPUT (OUTPUT #3) VDC INPUT (INPUT #7) VDC OUTPUT (OUTPUT #1) (T) (R) ON CFM SENSOR PORT SWITCH ON/HEARTBEAT LED JUMPER M2V-FS) MODULE TYPE 10K, 100K 10K, 100K 1 2 3 4 5 6 7 8 TEMP AIR DAMPER DAMPER 0-10V TABLE BLOCK (9) AIR (10) (15) (13) BOARD BOARD BOARD BOARD BOARD OUTPUT TABLE MODULE 0-10V BOARD BOARD OUTPUT TABLE OUTPUT 1 MAIN ACTUATOR CW 2 ACTUATOR MODULE 3 AUX ACTUATOR CW 4 AUX ACTUATOR CCW 5 6 7 8 OUTPUT OUTPUT OUTPUT OUTPUT FUTURE USE FUTURE USE MUST HAVE 8 PIN RJ-45 TO PROPERLY CONNECT M2V SIDE TERMINAL. DU-1 ALSO HAVE BEEN PURCHASED NOV. 2004. HAS INTERNAL TEMPERATURE THAT SHARES THE SAME AS TEMP SENSOR #1). DU-1 AND TEMP TERMINAL CANNOT BE SIMULTANEOUSLY.
M2V – VAV Controller Document 3 01/2005 Cont Environment 40 to 140 F (4 to 60 C) * 10-90% Relative, noncondensing ** Storage Temperature: -10 to 150 F (-23 to 66 C) Storage Humidity: 0-95% Relative, noncondensing Communication RS-485 3 conductor, 18 guage, shielded, up to 8000ft max. Rate (selectable): 57.6k, 38.4k, 19.2k, 9600, 2400, 1200 Backup 7 year lithium Dimensions 70 mm (2.75 in) 78 mm (3.0 in) 160 mm (6.3 in) Holes: 148.5 mm (5.85 in) Center to Center 1.2 lb Approvals Device: Pending Air Volume Controller M2V is the next generation Variable Air and Temperature Controller. Plug-in modules available for flow sensing, actuator and external control. These plug-in modules allow easy of the M2V for any type of VAV This peer-to-peer, stand alone or VAV controller can control ANY type of air volume unit. Requirements Inputs: Temperature* Temperature* Zone Temperature Setpoint Adjust (ZTS-A) Main Damper Actuator Position Auxiliary Damper Actuator Position Temperature Inputs are 3k, 10k, 100kohm thermistor, Type 3. Outputs: Actuator Output 0-10vdc* Actuator Output 0-10vdc* Can drive down to 10Kohm loads at 10vdc Voltage: 23 to 28 VAC 50/60 Hz 1.7 VA (without optional plug-in modules) 10.3 VA (all optional plug-in modules used) Voltage Fuse: Resetable fuse rated at 1.1A at 24VAC is in the process of UL/CSA approval for the entire M2 family and associated modules. Please use Solidyne UL number E76576 24G9 for all references to agency approvals. – REV 3 – 01/2005 Solidyne Corporation 4215 Kirchoff Rd. Rolling Meadows IL 60008 (800) 648-3980 www.solidyne.com MODULE M2-R4) M2V-FMD) M2V-FMD) HOT NEUTRAL RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION RS-485 LAN COMM CONNECTION TEMP COMMON TEMP 3/10/100K (INPUT #2) COMMON TEMP 3/10/100K (INPUT #1) ADJUSTMENT POT (INPUT #3) TRANSDUCER POWER 25mA MAX VDC INPUT/OUTPUT COMMON VDC INPUT (INPUT #8) VDC OUTPUT (OUTPUT #3) VDC INPUT (INPUT #7) VDC OUTPUT (OUTPUT #1) (T) (R) ON CFM SENSOR PORT SWITCH ON/HEARTBEAT LED JUMPER M2V-FS) MODULE TYPE 10K, 100K 10K, 100K 1 2 3 4 5 6 7 8 TEMP AIR DAMPER DAMPER 0-10V TABLE BLOCK (9) AIR (10) (15) (13) BOARD BOARD BOARD BOARD BOARD OUTPUT TABLE MODULE 0-10V BOARD BOARD OUTPUT TABLE OUTPUT 1 MAIN ACTUATOR CW 2 ACTUATOR MODULE 3 AUX ACTUATOR CW 4 AUX ACTUATOR CCW 5 6 7 8 OUTPUT OUTPUT OUTPUT OUTPUT FUTURE USE FUTURE USE MUST HAVE 8 PIN RJ-45 TO PROPERLY CONNECT M2V SIDE TERMINAL. DU-1 ALSO HAVE BEEN PURCHASED NOV. 2004. HAS INTERNAL TEMPERATURE THAT SHARES THE SAME AS TEMP SENSOR #1). DU-1 AND TEMP TERMINAL CANNOT BE SIMULTANEOUSLY.