Home » System Sensor L-Series Audible Visible Accessories
File preview
Click the button below to download immediately for free
Show text preview
Audible Visible Sensor L-Series offers a wide range of Audible (AV) accessories to enable you to meet a variety application requirements. Mounting Plate Designed for both indoor and outdoor use Plug-in design eliminates ground faults Power supply that converts 120 VAC to nominal 24 V FWR Compatible with all two-wire L-Series devices Lens Attachments Easily turns any device into a strobe for ECS/MNS events: weather, toxic gases, sprinkler activation and more Outdoor rated from to 151 Wall- or ceiling-mount lenses available UL 1638 listed Kits Easily turn a Fire or Plain device into a device to meet ECS/MNS requirements Bezel kits available for strobes, horns, chimes, horn strobes, chime strobes and speaker strobes Bezels options with FIRE, ALERT, EVAC, AGENT, PLAIN, FUEGO, FOGO printing For use with L-Series devices only Operating temperature -40 to 151 Listings approved : modules and MP120KL. 3057072, 3057493 not include color lenses. MP120KL Mounting Plate is designed to use 120 VAC to power Advance horns, strobes, horn strobes, chimes, and strobes. Lens Attachments install easily on any L-Series strobe to provide distinctive visual signaling. Kits enable installers to easily turn any L-Series Fire or Plain into a device that meets ECN/MNS requirements. Bezel kits available for all varieties and footprints of L-Series products and in FIRE, ALERT, EVAC, AGENT, FUEGO, FOGO, and Plain making customization easy. Trim Rings for wall and ceiling mount devices allow for space within the backbox. Surface Mount Back Boxes are the best solution in where you have a hard surface to mount to. Sync Module synchronizes L-Series strobes at 1 Hz and and chimes at temporal 3 over a single pair of wires. Patented technology also allows the silencing of horns or chimes on strobe and chime strobe models over a pair of wires. See the Datasheet for more information. VAC mounting plate model MP120KL shall be listed to UL 464 for fire protective signaling systems. The mounting plate shall power a two- L-Series horn, strobe, horn strobe, chime or chime strobe from a 120 VAC supply converted to nominal 24 V FWR. For indoor applications, mounting plate shall be installed in a 4x4x21/8 -inch junction box. may be used with any of the following products at all horn and strobe settings: P2RL, P2WL, P2RL-P, P2WL-P, P2RL-SP, P2WL-SP, PC2WL, SRL, SWL, SRL-P, SWL-P, SRL-SP, SWL-CLR-ALERT, SWL-ALERT, SCRL, SCWL, SCWL-CLR-ALERT, HRL, HWL, CHRL, CHSRL, CHSWL, CHSCRL, CHSCWL. Specifications Operating Temperature Range Voltage Voltage Range Draw From AC Line Bezels System Sensor L-Series bezels are for installation with strobes, horns, chimes, horn strobes, chime strobes, and speaker strobes. are offered in red and white for both wall and ceiling devices. Available in FIRE, ALERT, EVAC, AGENT, Plain (no marking), FUEGO, FOGO. Operating temperature shall be -40 to 151 to 151 ( to 66 to 93% non-condensing (indoor products) 120 VAC VAC mA max. Lens Attachments System Sensor L-Series colored lens attachments shall be approved for fire protective service as listed in UL 1638. The lens attachments only be used with plain (no print) System Sensor strobe devices or in conjunction with a non-fire printed bezel. The lens shall to any wall- or ceiling-mount strobes and shall be rated from to 151 lens attachments may be used with the following System Sensor L-Series plain (non-FIRE-printed) strobe models: P2RL-P, P2WL-P, SWL-P, SPSRL-P, SPSWL-P, SPSCWL-P, or any device used with a non-FIRE printed bezel. Lens Installation to Wall-Mount Strobe to Ceiling-Mount Strobe No. Lenses
Audible Visible Sensor L-Series offers a wide range of Audible (AV) accessories to enable you to meet a variety application requirements. Mounting Plate Designed for both indoor and outdoor use Plug-in design eliminates ground faults Power supply that converts 120 VAC to nominal 24 V FWR Compatible with all two-wire L-Series devices Lens Attachments Easily turns any device into a strobe for ECS/MNS events: weather, toxic gases, sprinkler activation and more Outdoor rated from to 151 Wall- or ceiling-mount lenses available UL 1638 listed Kits Easily turn a Fire or Plain device into a device to meet ECS/MNS requirements Bezel kits available for strobes, horns, chimes, horn strobes, chime strobes and speaker strobes Bezels options with FIRE, ALERT, EVAC, AGENT, PLAIN, FUEGO, FOGO printing For use with L-Series devices only Operating temperature -40 to 151 Listings approved : modules and MP120KL. 3057072, 3057493 not include color lenses. MP120KL Mounting Plate is designed to use 120 VAC to power Advance horns, strobes, horn strobes, chimes, and strobes. Lens Attachments install easily on any L-Series strobe to provide distinctive visual signaling. Kits enable installers to easily turn any L-Series Fire or Plain into a device that meets ECN/MNS requirements. Bezel kits available for all varieties and footprints of L-Series products and in FIRE, ALERT, EVAC, AGENT, FUEGO, FOGO, and Plain making customization easy. Trim Rings for wall and ceiling mount devices allow for space within the backbox. Surface Mount Back Boxes are the best solution in where you have a hard surface to mount to. Sync Module synchronizes L-Series strobes at 1 Hz and and chimes at temporal 3 over a single pair of wires. Patented technology also allows the silencing of horns or chimes on strobe and chime strobe models over a pair of wires. See the Datasheet for more information. VAC mounting plate model MP120KL shall be listed to UL 464 for fire protective signaling systems. The mounting plate shall power a two- L-Series horn, strobe, horn strobe, chime or chime strobe from a 120 VAC supply converted to nominal 24 V FWR. For indoor applications, mounting plate shall be installed in a 4x4x21/8 -inch junction box. may be used with any of the following products at all horn and strobe settings: P2RL, P2WL, P2RL-P, P2WL-P, P2RL-SP, P2WL-SP, PC2WL, SRL, SWL, SRL-P, SWL-P, SRL-SP, SWL-CLR-ALERT, SWL-ALERT, SCRL, SCWL, SCWL-CLR-ALERT, HRL, HWL, CHRL, CHSRL, CHSWL, CHSCRL, CHSCWL. Specifications Operating Temperature Range Voltage Voltage Range Draw From AC Line Bezels System Sensor L-Series bezels are for installation with strobes, horns, chimes, horn strobes, chime strobes, and speaker strobes. are offered in red and white for both wall and ceiling devices. Available in FIRE, ALERT, EVAC, AGENT, Plain (no marking), FUEGO, FOGO. Operating temperature shall be -40 to 151 to 151 ( to 66 to 93% non-condensing (indoor products) 120 VAC VAC mA max. Lens Attachments System Sensor L-Series colored lens attachments shall be approved for fire protective service as listed in UL 1638. The lens attachments only be used with plain (no print) System Sensor strobe devices or in conjunction with a non-fire printed bezel. The lens shall to any wall- or ceiling-mount strobes and shall be rated from to 151 lens attachments may be used with the following System Sensor L-Series plain (non-FIRE-printed) strobe models: P2RL-P, P2WL-P, SWL-P, SPSRL-P, SPSWL-P, SPSCWL-P, or any device used with a non-FIRE printed bezel. Lens Installation to Wall-Mount Strobe to Ceiling-Mount Strobe No. Lenses