Home » System Sensor L-Series Chimes and Chime_Strobes
File preview
Click the button below to download immediately for free
Show text preview
Selectable Output and Chime/ Sensor L-Series selectable-output chimes and are rich with features guaranteed to cut times and maximize profits with lower current and modern aesthetics. Updated modern aesthetics Plug-in design with minimal intrusion into the back box Mounting plate shorting spring feature checks wiring continuity device installation Captive mounting screw Tamper-resistant construction Field-selectable candela settings: Wall: 15, 30, 75, 95, 110, 135, 185 Ceiling: 15, 30, 75, 95, 115, 150, 177 Automatic selection of 12- or 24-volt operation 15 and 30 candela Rotary switch for tone and volume selections Five selectable tones with high and low volume settings Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices Wall models listed for wall mounting only, ceiling models listed for ceiling mounting only System Sensor L-Series product line of wall and ceiling- chimes and chime strobes include a variety of features that their application versatility while simplifying the installation. white and red plastic housings, System Sensor L-Series can virtually any application requirement. chimes and chime/strobes are private mode appliances used to alert trained personnel to investigate emergency situations and to take appropriate action. guard and nurse workstations are ideal locations for products. devices feature plug-in design with minimal intrusion into the box, making the installation fast and foolproof while virtually costly and time-consuming ground faults. can easily adapt devices to a wide range of application using field-selectable candela settings, automatic of 12-or-24 volt operation, and a rotary switch for chime and two volume selections. Listings 3057072 Specifications Specifications Sensor L-Series chimes and chime strobes shall mount to a standard 4 4 1 back box, 4-inch octagon back box, single- 2 4 17/8-inch back box, or double-gang back box. A universal mounting plate shall be used for mounting products. The notification circuit wiring shall terminate at the universal mounting plate. Also, System Sensor L-Series products, when used with the Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or volts. When used with the Sync Module, 12-volt rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between and 120 degrees Fahrenheit from a regulated DC, or full-wave rectified, unfiltered power supply. Chime strobes shall have field-selectable settings of 15, 30, 75, 95, 110 , 135, and 185 for wall units and 15, 30, 75, 95, 115, 150, and 177 for ceiling units. Strobe Combination chime strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1638 and UL 464. The chime strobe shall comply the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1Hz over the strobe entire operating voltage The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The chime shall have two audibility options an option to switch between temporal three pattern, non-temporal(continuous) pattern, 1 second chime pattern, 1/4 second chime 5 second whoop chime pattern. These options are set by a multiple position switch. Module module shall be a System Sensor Sync _______ listed to UL 464 and shall be approved for fire protective service. The module shall SpectrAlert strobes at 1Hz and all available chime tones. Also, while operating the strobes, the module shall silence the chimes chime/strobe models over a single pair of wires. The module shall mount to a 4 11/16 4 11/16 2 1/8-inch back box. The module shall also two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more modules together will synchronize all the zones they control. The module shall not operate on a cod
Selectable Output and Chime/ Sensor L-Series selectable-output chimes and are rich with features guaranteed to cut times and maximize profits with lower current and modern aesthetics. Updated modern aesthetics Plug-in design with minimal intrusion into the back box Mounting plate shorting spring feature checks wiring continuity device installation Captive mounting screw Tamper-resistant construction Field-selectable candela settings: Wall: 15, 30, 75, 95, 110, 135, 185 Ceiling: 15, 30, 75, 95, 115, 150, 177 Automatic selection of 12- or 24-volt operation 15 and 30 candela Rotary switch for tone and volume selections Five selectable tones with high and low volume settings Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices Wall models listed for wall mounting only, ceiling models listed for ceiling mounting only System Sensor L-Series product line of wall and ceiling- chimes and chime strobes include a variety of features that their application versatility while simplifying the installation. white and red plastic housings, System Sensor L-Series can virtually any application requirement. chimes and chime/strobes are private mode appliances used to alert trained personnel to investigate emergency situations and to take appropriate action. guard and nurse workstations are ideal locations for products. devices feature plug-in design with minimal intrusion into the box, making the installation fast and foolproof while virtually costly and time-consuming ground faults. can easily adapt devices to a wide range of application using field-selectable candela settings, automatic of 12-or-24 volt operation, and a rotary switch for chime and two volume selections. Listings 3057072 Specifications Specifications Sensor L-Series chimes and chime strobes shall mount to a standard 4 4 1 back box, 4-inch octagon back box, single- 2 4 17/8-inch back box, or double-gang back box. A universal mounting plate shall be used for mounting products. The notification circuit wiring shall terminate at the universal mounting plate. Also, System Sensor L-Series products, when used with the Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or volts. When used with the Sync Module, 12-volt rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between and 120 degrees Fahrenheit from a regulated DC, or full-wave rectified, unfiltered power supply. Chime strobes shall have field-selectable settings of 15, 30, 75, 95, 110 , 135, and 185 for wall units and 15, 30, 75, 95, 115, 150, and 177 for ceiling units. Strobe Combination chime strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1638 and UL 464. The chime strobe shall comply the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1Hz over the strobe entire operating voltage The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The chime shall have two audibility options an option to switch between temporal three pattern, non-temporal(continuous) pattern, 1 second chime pattern, 1/4 second chime 5 second whoop chime pattern. These options are set by a multiple position switch. Module module shall be a System Sensor Sync _______ listed to UL 464 and shall be approved for fire protective service. The module shall SpectrAlert strobes at 1Hz and all available chime tones. Also, while operating the strobes, the module shall silence the chimes chime/strobe models over a single pair of wires. The module shall mount to a 4 11/16 4 11/16 2 1/8-inch back box. The module shall also two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more modules together will synchronize all the zones they control. The module shall not operate on a cod