System Sensor L-Series ECS-MNS (AVDS871)

Field-Selectable Sensor L-Series emergency communications and accessories combine application versatility all the time- and money-saving benefits of the line. Communications Features: Plain or ALERT-printed white housings Clear or Amber lens strobes and speaker strobes Color lens attachments for use with clear lens or ceiling strobes Meets DoD specification requirements Features: Plug-in design for simplified installation and troubleshooting Mounting plate shorting spring easily tests wiring continuity Automatic selection of 12- or 24-volt operation 15 and 30 candela Field-selectable candela settings of: Wall: 15, 30, 75, 95, 110, 135, 185 Ceiling: 15, 30, 75, 95, 115, 150, 177 Rated from 32 to 120 (indoor devices) Optional tamper-resistant Torx head screw Compatible with System Sensor synchronization protocol Listings strobes: S4011 Strobes: approved except for 7125-1653:0504 models and colored lenses. Strobes: 3057383, 3057072 Strobes: 7135-1653:0503 Strobes: 7320-1653:0505 Strobes: 3057493 Sensor L-Series, the broadest and most versatile line notification devices available, includes a wide range of devices to emergency communications application requirements. on white housings amber lens strobes and speaker provide visual signaling for emergency communications in with ANSI/ UL 1638 Standard for General Signaling Appliances. Other Plain or ALERT-printed models provide clear for use with color lens strobe attachments (amber, blue, green, red) that easily attach to strobe and speaker strobe devices a candela derating. addition, L-Series emergency communications devices include (non-printed) strobes, horn strobes, and speaker strobes. devices, along with ALERT-printed devices and L-Series can meet a wide range of requirements for indoor including emergency communications, general severe weather, and emergency response. L-Series emergency communications and general signaling are compatible with the entire L-Series line and include all same time- and money-saving innovations. For example, plug design simplifies installation and reduces costly ground faults, mounting plates with onboard shorting springs test wiring to speed installation and protect devices from damage, field-selectable settings provide versatility and enable installers quickly set each device to meet application requirements. Specifications Specifications Sensor L-Series strobes and horn strobes shall mount to a standard 4 4 1 back box, 4-inch octagon back box, or double-gang back box. L-Series devices shall mount to a single-gang 2 4 17 back box. L-Series speaker strobes shall mount to a 4 x 4 x 21/8-inch back box. A universal mounting plate be used for mounting ceiling and wall products. The notification appliance circuit wiring and amplifier wiring shall terminate at the universal mounting plate. Also, products, when used with the Sync Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a 12 or 24 volts. When used with the Sync Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 32 and 120 degrees Fahrenheit from a DC or full-wave rectified unfiltered power supply. Strobes, horn strobes, and speaker strobes shall have field-selectable candela settings, including 15, 30, 75, 95, 115, 135, 150, 177, and 185. clear strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and shall be approved for fire protective service. Colored lens strobes shall be listed to 1638 and shall be approved for Private Mode Emergency. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans Disabilities Act requirements for visible signaling appliances, flashing at1 Hz over the strobe entire operating voltage range. The strobe light shall consist