Home » System Sensor L-Series Strobes and Horn Strobes for Ceiling Applications
File preview
Click the button below to download immediately for free
Show text preview
Indoor Selectable- Strobes and Strobes for Applications Sensor L-Series audible visible notification are rich with features guaranteed to cut times and maximize profits with lower draw and modern aesthetics. Plug-in design with minimal intrusion into the back box Tamper-resistant construction Automatic selection of 12- or 24-volt operation 15 and 30 candela Field-selectable candela settings on ceiling units: 30, 75, 95, 115, 150, and 177 Horn rated at 88+ dBA at 16 volts Rotary switch for horn tone and two volume selections Universal mounting plate for ceiling units Compatible with MDL3 sync module Listed for ceiling mounting only Listings approved except ALERT models System Sensor L-Series offers the most versatile and line of horns, strobes, and horn strobes in the industry lower current draws and modern aesthetics. With white and red housings, wall and ceiling mounting options, System Sensor can meet virtually any application requirement. entire L-Series product line of ceiling-mount strobes and horn include a variety of features that increase their application while simplifying installation. All devices feature a plug-in with minimal intrusion into the back box, making installations and foolproof while virtually eliminating costly and time- ground faults. Mounting plate shorting spring feature checks wiring continuity device installation Electrically Compatible with legacy SpectrAlert and SpectrAlert Advance devices further simplify installation, the L-Series utilizes a universal plate so installers can mount them to a wide array of back With an onboard shorting spring, installers can test wiring before the device is installed. can also easily adapt devices to a suit a wide range of requirements using field-selectable candela settings, selection of 12- or 24-volt operation, and a rotary switch horn tones with two volume selections. 12/01/2017 Page 3 Specifications Specifications ceiling-mount strobes and horn strobes shall mount to a standard 4 4 1 back box, 4-inch octagon back box, or double- back box. Two-wire products shall also mount to a single-gang 2 4 17 back box. A universal mounting plate shall be used mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series when used with the Sync Module accessory, shall be powered from a non-coded notification appliance circuit output shall operate on a nominal 12 or 24 volts. When used with the Sync Module, 12-volt-rated notification appliance circuit outputs operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. strobes and horn strobes shall have field-selectable candela settings including 15, 30, 75, 95, 115, 150, and 177. strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible appliances, flashing at 1 Hz over the strobe entire operating voltage range. The strobe light shall consist of a xenon flash tube and lens/reflector system. Strobe Combination horn strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act for visible signaling appliances, flashing at 1 Hz over the strobe entire operating voltage range. The strobe light shall consist a xenon flash tube and associated lens/reflector system. The horn shall have two audibility options and an option to switch between a three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position
Indoor Selectable- Strobes and Strobes for Applications Sensor L-Series audible visible notification are rich with features guaranteed to cut times and maximize profits with lower draw and modern aesthetics. Plug-in design with minimal intrusion into the back box Tamper-resistant construction Automatic selection of 12- or 24-volt operation 15 and 30 candela Field-selectable candela settings on ceiling units: 30, 75, 95, 115, 150, and 177 Horn rated at 88+ dBA at 16 volts Rotary switch for horn tone and two volume selections Universal mounting plate for ceiling units Compatible with MDL3 sync module Listed for ceiling mounting only Listings approved except ALERT models System Sensor L-Series offers the most versatile and line of horns, strobes, and horn strobes in the industry lower current draws and modern aesthetics. With white and red housings, wall and ceiling mounting options, System Sensor can meet virtually any application requirement. entire L-Series product line of ceiling-mount strobes and horn include a variety of features that increase their application while simplifying installation. All devices feature a plug-in with minimal intrusion into the back box, making installations and foolproof while virtually eliminating costly and time- ground faults. Mounting plate shorting spring feature checks wiring continuity device installation Electrically Compatible with legacy SpectrAlert and SpectrAlert Advance devices further simplify installation, the L-Series utilizes a universal plate so installers can mount them to a wide array of back With an onboard shorting spring, installers can test wiring before the device is installed. can also easily adapt devices to a suit a wide range of requirements using field-selectable candela settings, selection of 12- or 24-volt operation, and a rotary switch horn tones with two volume selections. 12/01/2017 Page 3 Specifications Specifications ceiling-mount strobes and horn strobes shall mount to a standard 4 4 1 back box, 4-inch octagon back box, or double- back box. Two-wire products shall also mount to a single-gang 2 4 17 back box. A universal mounting plate shall be used mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series when used with the Sync Module accessory, shall be powered from a non-coded notification appliance circuit output shall operate on a nominal 12 or 24 volts. When used with the Sync Module, 12-volt-rated notification appliance circuit outputs operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. strobes and horn strobes shall have field-selectable candela settings including 15, 30, 75, 95, 115, 150, and 177. strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible appliances, flashing at 1 Hz over the strobe entire operating voltage range. The strobe light shall consist of a xenon flash tube and lens/reflector system. Strobe Combination horn strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act for visible signaling appliances, flashing at 1 Hz over the strobe entire operating voltage range. The strobe light shall consist a xenon flash tube and associated lens/reflector system. The horn shall have two audibility options and an option to switch between a three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position