INSTALLATION INSTRUCTIONS Trim Rings use with the following models: TR-2, TR-2W, TRC-2, TRC-2W rings are available in 4 variations: TR-2: Wall mount, red TR-2W: Wall mount, white TRC-2: Ceiling mount, red TRC-2W: Ceiling mount, white supported: Single gang Double Gang 4″ octagon 4″ x 4″ x 11/2″ Back Box 4″ x 4″ x 21/8″ Back Box Ohio Avenue, St. Charles, Illinois 60174 FAX: 630/377-6495 DESCRIPTION trim rings provide additional space within the backbox. The design is across the L-series notification appliance line and supports indoor horn strobes, chimes, chime strobes, strobes, speakers, and speaker the instructions below for installing trim ring models TR-2, TR-2W, and TRC-2W with the L-Series devices: horn, horn strobe, strobe, chime strobe, speaker, and speaker strobe. Align two screw holes on the L-series mounting plate to the correspond- screw holes on the trim ring. (See Figures below.) Align the two screw holes on the back box with the screw holes on the plate. 1: WALL MOUNT TRIM RING 2: CEILING MOUNT TRIM RING box box Ring Plate Ring Plate Appliance Appliance Sensor is a registered trademark of Honeywell International, Inc. System Sensor. 08-24
_preview.jpg)
