System Sensor SWIFT Wireless L-Series AV Sync Module

SWIFT W-SYNC Module System Sensor SWIFT Wireless system offers for wireless installations. Class A mesh network Addressable code wheels Commercial applications UL 864 listed Frequency hopping Bi-Directional Communications Listings Vol. 2 SWIFT synchronization module (W-SYNC) provides audio visual synchronization between SWIFT notification appliances System Sensor wired notification appliances supporting the wired-wireless solution. The module only operates with appliances that use the System Sensor synchronization Synchronization of the SWIFT notification appliances within single mesh network is inherent in the wireless system so a wireless module is not needed. The W-SYNC also provides control and monitoring of a Notification Appliance Circuit expander or power supply. The wireless synchronization operates from 24V power with supplemental battery support communicates through the mesh network to the gateway and SYSTEM OVERVIEW SWIFT Smart Wireless Integrated Fire Technology wireless offers intelligent (addressable) devices which provide secure, communication to the Fire Alarm Control Panel (FACP) across Class A mesh network. Wireless devices create an opportunity applications where it is costly (concrete walls/ceilings, buried obtrusive (surface mount conduit), or possibly dangerous to use traditional wired devices. It allows fast installation time-critical situations and provides the flexibility to add wireless wired systems for retrofit installations. Both wired and wireless can be present on the same FACP for an integrated solution. mesh network within the SWIFT system creates a child-parent between the devices so that each device has two providing a second path for communications on every If one device can no longer operate for any reason, the of the devices can still communicate with each other, directly through one or more intermediate devices. Once an initial mesh is formed, mesh restructuring automatically occurs to find strongest paths possible within the network. SWIFT system also engages frequency hopping to prevent interference whether intentional or accidental. Each device with part 15 of the FCC rules: 1) The device may not cause interference and 2) The device must accept any interference including interference that may cause undesired operation. 11/08/2018 Page 1 Specifications Specifications Operating Voltage Current Draw Operating Current EOL Resistance Monitor Wiring Resistance Monitor Voltage Transmit RF Power Frequency Range Range Type (Supplemental) Life Current Draw Replacement 4.25 in. (10.8 cm); Width 4.25 in. (10.8 cm); Depth 1.5 in. (3.8 cm); oz. (241 grams) includes 4 batteries to 30 VDC mA (in alarm) (with 3.9k ELR) Ohms Ohms Volts dBm MHz to 120 (0 to 49 to 93% Non-condensing Panasonic CR123A or 4 Duracell DL123A year minimum (with 3.9k ELR) TROUBLE BATTERY LOW display and/or during annual maintenance Information No. BATTERY CARTRIDGE 10-PACK SURFACE MOUNT BACK BOX AV BASE CEILING RED AV BASE CEILING WHITE SYNC MODULE Sensor and SWIFT are registered trademarks Honeywell International, Inc. is a registered trademark of Duracell U.S. Operations Inc. is a registered trademark of Panasonic Corporation. Ohio Avenue St. Charles, IL 60174 800-SENSOR2 Fax: 630-377-6495 System Sensor. specifications subject to change without notice. Visit systemsensor.com current product information, including the latest version of this data sheet. 11/08/2018