HyperSpike LineWave Data Sheet

LineWave Full Range Line Array Loudspeaker Signaling Notification Speaker Leading Voice Intelligibility for Spaces Max SPL 1 Meter Rated for Indoor or Outdoor Universal Mounting Interface 70V 100V or 4 8 16 Durable Environmental Resistant 90243A 801 Rating Response Angle Range UL1480 ULC Up to 200W continuous 250Hz 15kHz nominal 103.1dB 2.83V 1m 187 Horiz x 10 Vert 9dB 14.7lbs 46.5 x 4.9 W x 2.9 D 60 with the latest technology in line array systems the HyperSpike LineWave is to produce clear and authoritative voice and powerful tones never before possible reverberant environments The beam forming of the LineWave speaker allows even across the listening plane while focusing the pattern away from surfaces that cause reflections This technology is essential for optimum levels of speech intelligibility reverberant spaces The result is clear and direct sound that ensures critical messages heard and understood UL1480 20W LINEARRAY SPKR BLACK UL1480 40W LINEARRAY SPKR BLACK UL1480 80W LINEARRAY SPKR BLACK UL1480 160W LINEARRAY SPKR BLACK UL1480 20W LINEARRAY SPKR RED UL1480 40W LINEARRAY SPKR RED UL1480 80W LINEARRAY SPKR RED UL1480 160W LINEARRAY SPKR RED UL1480 20W LINEARRAY SPKR WHITE UL1480 40W LINEARRAY SPKR WHITE UL1480 80W LINEARRAY SPKR WHITE UL1480 160W LINEARRAY SPKR WHITE UL1480 20W LINEARRAY SPKR GREY UL1480 40W LINEARRAY SPKR GREY UL1480 80W LINEARRAY SPKR GREY UL1480 160W LINEARRAY SPKR GREY and Engineer Specifications see Models and Technical Specifications to fill in the blanks for specific speaker selection paging and tone signaling loudspeaker shall be Ultra Electronics Model Unit shall be UL 1480 Listed weather resistant constructed of powder coated aluminum and steel The loudspeaker shall be able to operate within any ambient temperature ranging from 20 to 60 The speaker shall have a sensitivity of when measured at 1m AVG 250 15,000Hz a horizontal beam width of 187 AVG 1kHz to 4kHz The transducer coils shall have a nominal 8 ohm impedance When a minimum of four transformer power settings shall be selectable for each speaker and it shall operate on 25V 70V or distributed audio systems Transformers shall contain an in line capacitor to allow DC supervision of wiring Frequency shall be 250Hz 15kHz Dimensions shall be x 4.9 x 2.9 Rev D Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 1 of 6 260 248 3666 Full Range Line Array Loudspeaker Specifications Mode of Speakers in Array Power Draw 8 and 4 Models SPL 1m 18V Direct Drive SPL 1m Range 80dB SPL 10 ft 18V Direct Drive SPL 3m 18V Direct Drive Sensitivity 2.83Vrms 1m Impedance Coverage 9dB 1kHz 4kHz Response 6dB Input Signal Processing Coverage 9dB 1kHz 4kHz Input Voltage 8 and 4 Models Material Material Connection Protection Dimensions HxWxD in Weight lbs Range Column Loudspeaker Loudspeaker with Optional Line Matching Transformer 56ft 115ft 230ft 463ft 2 Channel Pass at 200Hz Direct Drive Models Only RMS 36V Peak Red White Silk Grey Cable 6ft Provided and Outdoor Applications x 4.9 x 2.9 12.3 x 4.9 x 2.9 23.7 x 4.9 x 2.9 46.5 x 4.9 x 2.9 UL Standard SPL Measurement Rev D Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 2 of 6 260 248 3666 Full Range Line Array Loudspeaker Available Power and SPL Settings Voltage Draw Max SPL Reverb SPL 3m Standard SPL Measurement Rev D 10ft Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 260 248 3666 3 of 6 Horizontal Full Range Line Array Loudspeaker Plots and Beam Width Rev D Horizontal Width Vertical Vertical Width Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 260 248 3666 4 of 6 Full Range Line Array Loudspeaker 90243A 804 Reference LineWave models include hardware to facilitate Wall If it is desired to mount a LineWave to a pole Pole Mount 72581B 801 is available All mounts for Pan and Tilt angle adjustment after installation SJOOW 18 2 cable Reference models 90243A 801 90243 802 and 16 8 and 4 respectively a six interconnection