System Sensor 1451 Manual

INSTALLATION AND MAINTENANCE INSTRUCTIONS Plug in Ionization Detector Height Diameter Weight of 30 ft on a smooth ceiling as per NFPA 72E conditions or response requirements vary other Selection And Wiring Guide resistors 4 wire and 120VAC applications Note bases are provided with screw terminals for power if applicable The electrical ratings for each installing thoroughly read the System Sensor manual A05 Guide for System Smoke Detectors detailed information on detector spacing place zoning wiring and special applications Copies of installation in Canada refer to CAN ULC S524 for the Installation of Fire Alarm Systems and CEC following NFPA 72 requirements This sensor Description compatible UL listed control panels only The capa of plugging these detectors into a variety of special makes them more versatile than equivalent direct LEDs on each detector light to provide a local 360 is available as an optional accessory These detectors have the latching alarm feature The alarm can be only by a momentary power interruption For test testing the detector look for the presence of the to the detector check the wiring or it is defective 1 2 LEDs on the detector should latch on within 3 voltmeter to check the detector sensitivity as de MAINTENANCE and retested If the detectors still a b the detector clockwise until the detector drops c Continue detector bases include a feature that when acti all detectors have been installed apply power to detectors are not to be used with detector guards the combination has been evaluated and found must be tested after installation and periodic 1 Bottom and side views showing test magnet position MODULE 2 is recommended that the detector be removed from its Before removing the detector notify the proper that the smoke detector system is undergoing the zone or system undergoing maintenance to pre the cover counterclockwise and pulling the 2 Usage of a System Sensor CRT400 cover re SCREEN RS14 PRONG CHAMBER refer to insert for the Limitations of Fire Alarm Systems Limited Warranty Sensor warrants its enclosed product to be free from defects in and workmanship under normal use and service for a period warranty for the enclosed product No agent representative obligations or limitations of this Warranty The Company obliga product which is found to be defective in materials or workman under normal use and service during the three year period com with the date of manufacture After phoning System Sensor free number 800 SENSOR2 736 7672 for a Return