System Sensor CB500 Manual

INSTALLATION INSTRUCTIONS Wiring Barrier CB500 barrier is used to separate power limited and limited wiring in a junction box It is designed for applications and one plastic tab must be removed to installation into a junction box to the installation manual for the module being installed determine which screw terminals are used to attach the Lines Then use diagonal cutters to cut off appropriate tab on the barrier as shown in the diagram 3825 Ohio Avenue St Charles Illinois 60174 FAX 630 377 6495 to installing the barrier into the junction box peel off label which says SIGNALING LOOP CIRCUIT TERMINALS POWER LIMITED OTHERS ARE NOT Affix this label over portion of the label on the back of the module which ALL CIRCUITS ARE POWER LIMITED instructions on the installation of this barrier can found in the installation manual for the module here for whose Lines to 0 and 1 here for whose Lines to 1 and 2 System Sensor 06 10