System Sensor FAAST XM 8100 Manual

INSTALLATION AND MAINTENANCE INSTRUCTIONS FAAST Alarm Aspiration Sensing Technology Ohio Avenue St Charles Illinois 60174 Fax 630.377.6495 Characteristics Supply Voltage Reset Time Reset Operating Current Contact Ratings Ratings Temperature Air Temperature Rating Area Movement Environments Dimensions Access Gauge Network Size Weight OF CONTENTS 18 30 VDC External monitor must be pulled low for a minimum of 100 msec 1 sec 415 mA 10W 24VDC 465 mA 11.2W 24VDC All relays active all alarm levels displayed 3.0 A 30 VDC 0.5A 125 VAC 32 0 to 100 38 20 to 140 60 10 to 95 non condensing 8,000 sq ft 743.2 sq m 0 4,000 ft min 0 1,219.2 m min equipment is suitable for use in Class I Division 2 Groups A B C and D or non hazardous locations only 13.25 in 33.66 cm 13.0 in 33 cm 5.0 in 12.7 cm 4 1 in 2.54 cm cable entry holes on top and bottom of unit 12 AWG 2.0523 mm max to 24 AWG 0.5105 mm min Up to 8000 sq ft approx 743 sq m Approved for 1000 sq m per AS1603.8 applications Maximum single pipe length 262 ft 80 m Network outside pipe diameter 1.050 in IPS 25 mm 11.6 lbs 5.26 kg includes packing material pipe diameter 591 to 827 in 15 21 mm OF THIS MANUAL 2 2 INCLUDED WITH UNIT 2 INSTALLATION 2 UNIT INSTALLATION 2 the Mounting Bracket 2 the Detector to the Bracket 3 the Air Sampling Pipe 3 Pipe 3 3 Cables 3 Usage 3 REQUIREMENTS 4 POWERING 4 INTERFACE INTERFACE CARD INSTALLATION 5 LEVEL DISPLAY 5 LEVEL DISPLAY 5 FLOW FAULT DISPLAY 5 5 INTERFACE BUTTONS 5 OF OPERATION or Network Loss during Configuration 6 MODE 6 MODE 6 MODE 6 6 Acclimate mode 6 NIGHT AND WEEKEND MODE 7 7 BUTTON ALTERNATE FUNCTIONS 7 Access 7 Blink Mode 7 Address Blink Mode 7 8 CLOCK 8 8 Log 8 Trend Log 8 Log 8 MONITOR RESET 8 CONNECTION 8 NETWORK 8 SERVER 9 NOTIFICATION 9 SMOKE TESTING 9 9 TERMS 9 6 6 6 of Configuration Validation 6 OF THIS MANUAL manual is intended as a guide for technicians to install set up and pro preliminary system checks for the FAAST Fire Alarm Aspiration Sensing aspirating smok