System Sensor L-Series Colored Lens Accessory (I56-5102)

INSTALLATION AND MAINTENANCE INSTRUCTIONS Color Lenses use with the following models LENS B2 LENS G2 LENS R2 LENS AC2 LENS BC2 LENS GC2 LENS RC2 DESCRIPTION color lenses come in four colors options including amber blue green red The lenses are compatible with L Series strobes including wall or mount Note that color lenses must only be used with devices that are fire printed lens strobes are UL Listed under 1638 Visual Signaling Appliances Private Mode General Utility Signaling UL 1638 measures light output strobe devices on axis straight on See table below for candela color de Each candela rating shall be reduced by the listed percentages below wall units only Ohio Avenue St Charles Illinois 60174 FAX 630 377 6495 L Series models please follow the instructions below for installing lenses Before applying the color lens to the strobe clean the area around strobe lens Remove the red liner from the back of the color lens gently Make that the clear adhesive is still attached to the bottom flat surface the lens Align the slot on the color lens with the candela indicator window the unit This is a mistake proof step only on the wall units Apply and press the lens against the unit No de rating required for ceiling units 1 CANDELA DE RATING BY LENS COLOR Light Loss Wall Units to be used as a Visual Public Mode Alarm Notification Appliance 1 COLOR LENS INSTALLATION TO WALL MOUNT DEVICE 2 COLOR LENS INSTALLATION TO CEILING MOUNT DEVICE Sensor is a registered trademark of Honeywell International Inc System Sensor 11 18