System Sensor R-10T, R-14T, R-20T, and R-24T Manual

I AND MAINTENANCE INSTRUCTIONS 3825 Ohio Avenue St Charles Illinois 60174 FAX 630 377 6495 Voltage Relay Voltage Current R 10T R14T Current R 20T R 24T Temperature Range Ratings This manual should be left with the owner user of this equipment 18 35VAC 115VAC 230VAC DC 18 35VDC 59mA AC 18 35VAC AC 120VAC 180mA AC 240VAC DC 18 35VDC 92mA AC 18 35VAC mA AC 120VAC 260mA AC 240VAC to 158 to 70 93 RH non condensing 3.5 2.5 1.25 89 mm H 64 mm W 32 mm D 3.5 10 1.25 89 mm H 254 mm W 32 mm D 2 mounting screws R 14T R 24T 4 mounting screws 7A 10A 1 6 HP 7A Description R 10T R 20T and R 14T R 24T are multi voltage re with terminal strip field wiring connections mounting and hardware The R 10T is a single 1 FORM C SPDT with a red LED and the R 14T is a 4 gang 1 FORM C relay with 4 red LEDs The R 20T is a single 2 Form DPDT relay with a red LED and the R 24T is a 4 gang 2 C DPDT relay with 4 red LEDs The LEDs indicate energization of the Relay Coil V V V V V V used VDC 18 35VAC 115VAC 230VAC Relay used VDC 18 35VAC 115VAC 230VAC Relay VDC 18 35VAC 115VAC 230VAC used Limited Warranty Sensor warrants its enclosed product to be free from defects in and workmanship under normal use and service for a period three years from date of manufacture System Sensor makes no other warranty for the enclosed product No agent representative or employee of the Company has the authority to increase or alter obligations or limitations of this Warranty The Company obliga of this Warranty shall be limited to the replacement of any part of product which is found to be defective in materials or workman under normal use and service during the three year period com with the date of manufacture After phoning System Sensor free number 800 SENSOR2 736 7672 for a Return Authorization send defective units postage prepaid to System Sensor Returns RA 3825 Ohio Avenue St Charles IL 60174 include a note describing the malfunction and suspected cause failure The Company shall not be obligated to replace units which found to be defective because of damage unreasonable use modi or alterations occurring after the date of manufacture In no shall the Company be liable for any consequential or incidental for breach of this or any other Warranty expressed or implied even if the loss or damage is caused by the Company or fault Some states do not allow the exclusion or limita of incidental or consequential damages so the above limitation or may not apply to you This Warranty gives you specific legal and you may also have other rights which vary from state to state System Sensor