Valcom 30 Watt Radial Horn

PagePac WATT SUSPENDED-RADIAL HORN V-5331210 2 speakers that produce high sound levels are of covering large noisy areas. effective mounting height for a horn is The Suspended-Radial Horn is used 360 sound dispersion pattern is required. Speaker is provided with 10 mounting If this is not enough, additional chain must acquired. See suggested mounting height for requirements (Figure 2). High Intelligibility Built-in Transformer 360 Radial Dispersion Specifications Frequency Response: 225Hz – 14kHz Dispersion: 360 112 dB @ 1W, 1 Meter 70 Volt / 30 Watt 13.0″W x 11.8″H (33.0cm x 29.9cm) lbs. (4.5 kg) Temperature: 0 to 40 (32 to 104 Humidity: 0 to 85% the 10 foot metal chain supplied with the to the post and ring on the horn base (see 1). device used to attach the chain to the ceiling withstand a 30 pound pull test, or the weight by local construction or safety codes, is greater. CONNECTIONS clear plastic cover protects the horn screw ter- and provides strain relief for the wires. Remove the two screws from the plastic cover. Set volume adjustment to lowest setting. Connect the (+) 70V side of the speaker wire to 2. Connect the (-) or common side of speaker wire to terminal 1 (see Figure 1). Do not replace the plastic cover until final adjustments have been made. Manuals Online! – Manuals Online! – POWER ADJUSTMENTS that the speaker is set to its lowest setting will prevent an excessively loud page when used). Conduct test page and increase vol- as necessary with a screwdriver. Turn clock- to increase the volume (see Table 1). Install plastic cover. Due to high decibel output, it is not recom- to test paging while working closely with horn speaker. ASSISTANCE calling, have a VOM and a telephone test available and call from the job site. Call (540) and ask for PagePac Technical Sup- or call (540) 427-6000 for Valcom 24-hour Support or visit our websites at and www.valcom.com. repairs be necessary, attach a tag to the clearly stating company name, address, number, contact person, and the nature of problem. Send the unit to: Inc. Repair Dept. Hollins Road VA 24019-5056 RING CHAIN CABLE LEVEL NOT FORCE #7) 1 1: SWITCH SETTINGS NOT USE NOT USE NOT USE NOT USE Manuals Online! – Manuals Online! – dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB WATT RADIAL HORN PROJECTION DISTANCE SETTINGS FOR 70 VOLT SPK SHOWN IS THE RADIUS OF CIRCLE OR DISTANCE FROM SPK WATT WATT WATT WATT WATT USE ATTENUATOR FT 2 FT FT FT FT FT FT Manuals Online! – Manuals Online! –