Home » Valcom 70 Volt Desktop Speaker
File preview
Click the button below to download immediately for free
Show text preview
PagePac 2 VOLT DESKTOP SPEAKER 70 Volt Desktop Speaker is a completely 1/8 watt speaker unit for use with 70V systems. Each speaker is equipped with a cord and a SE-41A Connecting Block, is used to connect the speaker cord to the system speaker wires Figure 1). Volume Control Privacy / Talkback Switch 4.75 x 1.75 x 6.88 X 4.50cm X 17.48cm) 3.0 lbs (1.35 kg) Desktop Speaker is recommended for use all PagePac telephone paging systems (or systems) in which talkback is provided is two-way communication between the telephone and the paging loudspeaker). the Desktop Speaker may be used with- talkback. is recommended that each Desktop Speaker, used with talkback, be a separate paging If this is not feasible, the total number of Speakers in any one zone should be lim- to two or less. AND CONTROLS SWITCH the position, this switch allows two-way between the Desktop Speaker the paging telephone (once the paging tele- has accessed the speaker). In the talkback is inhibited and the speaker only as a one-way speaker. CONTROL control adjusts the speaker volume in the page and music modes (see Figure 1). It not affect the talkback level. the Desktop Speaker in the desired loca- Locate a convenient spot on the wall adja- to the speaker for the connecting block. the connecting block and attach it to the wall suitable mounting hardware, not supplied Figure 1). Connect the 70V and common from the speaker cord to the and ter- on the connecting block. Connect the red black wires from the paging system to the terminals on the connecting block. Con- the shield wire to the terminal (shielded cable is recommended). the connecting block. Manuals Online! – Manuals Online! – the Desktop Speaker and ensure that occurs. While a page is in progress, adjust speaker volume. While a page is in progress, the PRIVACY/TALKBACK switch in the and verify that two-way communication is Then place this switch in the and ensure that talkback is inhibited. Generally, music volume should be at the music source or on the PagePac or system amplifier. ASSISTANCE calling, have a VOM and a telephone test available and call from the job site. Call (540) and ask for PagePac Technical Sup- or call (540) 427-6000 for Valcom 24-hour Support or visit our websites at and www.valcom.com. repairs be necessary, attach a tag to the clearly stating company name, address, number, contact person, and the nature of problem. Send the unit to: Inc. Repair Dept. Hollins Road VA 24019-5056 WIRES CORD – 4IA WIRE SPEAKER FROM SYSTEM WIRE WIRES 1 Manuals Online! – Manuals Online! –
PagePac 2 VOLT DESKTOP SPEAKER 70 Volt Desktop Speaker is a completely 1/8 watt speaker unit for use with 70V systems. Each speaker is equipped with a cord and a SE-41A Connecting Block, is used to connect the speaker cord to the system speaker wires Figure 1). Volume Control Privacy / Talkback Switch 4.75 x 1.75 x 6.88 X 4.50cm X 17.48cm) 3.0 lbs (1.35 kg) Desktop Speaker is recommended for use all PagePac telephone paging systems (or systems) in which talkback is provided is two-way communication between the telephone and the paging loudspeaker). the Desktop Speaker may be used with- talkback. is recommended that each Desktop Speaker, used with talkback, be a separate paging If this is not feasible, the total number of Speakers in any one zone should be lim- to two or less. AND CONTROLS SWITCH the position, this switch allows two-way between the Desktop Speaker the paging telephone (once the paging tele- has accessed the speaker). In the talkback is inhibited and the speaker only as a one-way speaker. CONTROL control adjusts the speaker volume in the page and music modes (see Figure 1). It not affect the talkback level. the Desktop Speaker in the desired loca- Locate a convenient spot on the wall adja- to the speaker for the connecting block. the connecting block and attach it to the wall suitable mounting hardware, not supplied Figure 1). Connect the 70V and common from the speaker cord to the and ter- on the connecting block. Connect the red black wires from the paging system to the terminals on the connecting block. Con- the shield wire to the terminal (shielded cable is recommended). the connecting block. Manuals Online! – Manuals Online! – the Desktop Speaker and ensure that occurs. While a page is in progress, adjust speaker volume. While a page is in progress, the PRIVACY/TALKBACK switch in the and verify that two-way communication is Then place this switch in the and ensure that talkback is inhibited. Generally, music volume should be at the music source or on the PagePac or system amplifier. ASSISTANCE calling, have a VOM and a telephone test available and call from the job site. Call (540) and ask for PagePac Technical Sup- or call (540) 427-6000 for Valcom 24-hour Support or visit our websites at and www.valcom.com. repairs be necessary, attach a tag to the clearly stating company name, address, number, contact person, and the nature of problem. Send the unit to: Inc. Repair Dept. Hollins Road VA 24019-5056 WIRES CORD – 4IA WIRE SPEAKER FROM SYSTEM WIRE WIRES 1 Manuals Online! – Manuals Online! –