Home » Valcom V-1027C One-Way Amp[1]
File preview
Click the button below to download immediately for free
Show text preview
VSP-V-1016,V-1022C-27C 4 INSTRUCTIONS FOR AMPLIFIED INTERIOR WALL SPEAKERS V-1016-W V-1024C, V-1026C V-1025C, V-1027C One-Way Amplified Interior Speakers, V-1016-BK, V-1022C, V-1023C, V-1025C, V-1026C, V-1026C-W, are self-amplified and capable of paging as well as background music. speakers have externally accessible volume that are screwdriver adjustable. The are vinyl laminated pressboard with either coordinating cloth or woven can grille. All require -24 Vdc, 50 mA (1 power unit) and FCC Part 68 registered under Page Control -24 Vdc Power Supply Connections Do not connect this speaker directly to a volt amplifier as damage to both the and speaker may occur. A V-1095 may used to allow the use of Valcom self-amplified on 70V speaker lines. mounting heights are 8 to 12 ft. above the floor. V-1016-W, V-1022C, V-1023C: the screw holding the mounting bracket to speaker housing. Mount bracket using appro- hardware such as #8 pan head screws. After the required connections, reattach the speaker to the mounting bracket. V-1016 9.7 x 11.5 x 4.0 H x 29.2cm W x 10.16cm D) lbs. (1.86kg) V-1022C 9.6 x 11.5 x 4.2 H x 29.2cm W x 10.7cm D) lbs. (2.04kg) V-1023C 9.6 x 11.5 x 4.2 H x 29.2cm W x 10.7cm D) lbs. (1.86kg) V-1025C: After making required connec- use appropriate hardware such as an 8d nail to hang the speaker housing in the x 9.5 x 6.3 H x 24.1cm W x 16cm D) lbs. (1.63kg) Manuals Online! – V-1026C-W, V-1027C: Remove wing holding mounting bracket to speaker housing. bracket and mount using appropriate such as #8 pan head screws. Reattach housing to mounting bracket. Remove the 4 holding the reverse side grille to the speaker and remove the grille. After making required reattach the grille to the speaker x 10.3 x 4.2 H x 26.2cm W x 10.7cm D) lbs. (2.54kg) area covered by a wall speaker is typically 600 feet. of Speakers per Audio Run Run (Ft.) AWG AWG of Speakers per Power Run Watt Interior AWG ft. ft. ft. AWG ft. ft. ft. ASSISTANCE trouble is reported, verify there are no broken Assistance in troubleshooting is from the factory. Call (540) 427-3900 and for Technical Support, or call (540) 427-6000 for 24-hour Automated Support or visit our at http://www.valcom.com. equipment is not field repairable. Valcom, maintains service facilities in Roanoke, VA. repairs be necessary, attach a tag to the unit stating company name, address, phone contact person, and nature of the problem. the unit to: Inc. & Return Dept. Hollins Road VA 24019-5056 audio from volume from squeal CHART Check that volume control is turned up (clockwise). Using a lineman’s test set check for the proper audio level on the Tip and Ring and if necessary also at the source. Check that volume control is turned up. Check voltage at the speaker assembly when in use, -18 to -24 Vdc required. Using a lineman’s test set, check for the proper audio level on Tip and Ring It is possible that some low level audio will be heard with only one side of and Ring connected. Turn down (counter-clockwise) volume of the speaker. Add a V-9962 Digital Feedback Eliminator. the distance between the telephone and speaker. a noise canceling handset on the telephone in severe problem areas. Manuals Online! – Inc. warrants its products to be free from defects in materials
VSP-V-1016,V-1022C-27C 4 INSTRUCTIONS FOR AMPLIFIED INTERIOR WALL SPEAKERS V-1016-W V-1024C, V-1026C V-1025C, V-1027C One-Way Amplified Interior Speakers, V-1016-BK, V-1022C, V-1023C, V-1025C, V-1026C, V-1026C-W, are self-amplified and capable of paging as well as background music. speakers have externally accessible volume that are screwdriver adjustable. The are vinyl laminated pressboard with either coordinating cloth or woven can grille. All require -24 Vdc, 50 mA (1 power unit) and FCC Part 68 registered under Page Control -24 Vdc Power Supply Connections Do not connect this speaker directly to a volt amplifier as damage to both the and speaker may occur. A V-1095 may used to allow the use of Valcom self-amplified on 70V speaker lines. mounting heights are 8 to 12 ft. above the floor. V-1016-W, V-1022C, V-1023C: the screw holding the mounting bracket to speaker housing. Mount bracket using appro- hardware such as #8 pan head screws. After the required connections, reattach the speaker to the mounting bracket. V-1016 9.7 x 11.5 x 4.0 H x 29.2cm W x 10.16cm D) lbs. (1.86kg) V-1022C 9.6 x 11.5 x 4.2 H x 29.2cm W x 10.7cm D) lbs. (2.04kg) V-1023C 9.6 x 11.5 x 4.2 H x 29.2cm W x 10.7cm D) lbs. (1.86kg) V-1025C: After making required connec- use appropriate hardware such as an 8d nail to hang the speaker housing in the x 9.5 x 6.3 H x 24.1cm W x 16cm D) lbs. (1.63kg) Manuals Online! – V-1026C-W, V-1027C: Remove wing holding mounting bracket to speaker housing. bracket and mount using appropriate such as #8 pan head screws. Reattach housing to mounting bracket. Remove the 4 holding the reverse side grille to the speaker and remove the grille. After making required reattach the grille to the speaker x 10.3 x 4.2 H x 26.2cm W x 10.7cm D) lbs. (2.54kg) area covered by a wall speaker is typically 600 feet. of Speakers per Audio Run Run (Ft.) AWG AWG of Speakers per Power Run Watt Interior AWG ft. ft. ft. AWG ft. ft. ft. ASSISTANCE trouble is reported, verify there are no broken Assistance in troubleshooting is from the factory. Call (540) 427-3900 and for Technical Support, or call (540) 427-6000 for 24-hour Automated Support or visit our at http://www.valcom.com. equipment is not field repairable. Valcom, maintains service facilities in Roanoke, VA. repairs be necessary, attach a tag to the unit stating company name, address, phone contact person, and nature of the problem. the unit to: Inc. & Return Dept. Hollins Road VA 24019-5056 audio from volume from squeal CHART Check that volume control is turned up (clockwise). Using a lineman’s test set check for the proper audio level on the Tip and Ring and if necessary also at the source. Check that volume control is turned up. Check voltage at the speaker assembly when in use, -18 to -24 Vdc required. Using a lineman’s test set, check for the proper audio level on Tip and Ring It is possible that some low level audio will be heard with only one side of and Ring connected. Turn down (counter-clockwise) volume of the speaker. Add a V-9962 Digital Feedback Eliminator. the distance between the telephone and speaker. a noise canceling handset on the telephone in severe problem areas. Manuals Online! – Inc. warrants its products to be free from defects in materials