Valcom vp-412a

VSP VP 412A 8 VOLT DC POWER SUPPLY instructions contain the specifications and necessary to install operate and maintain VP 412A 12 Volt DC Power Supply VP 412A is a 12 volt DC power supply designed provide up to 4 amp of 12 Vdc unfiltered The VP 412A features a right angle connector VP 412A is for use with the Valcom V 2952 Tuner H x 2.0 W x 2.3 D H x 5.1cm W x 5.8cm D lbs 32 kg High impact ABS plastic case UL listed Requirements 105 130 V 60 Hz Temperature 0 to 50 Degrees C Humidity 0 to 85 non precipitating VP 412A is a receptacle mount 2 prong power with a coaxial barrel type plug install the VP 412A insert the plug into the hole on the marked 12 Vdc Refer to the on the next page 2 prong power supply into 120 Vac receptacle ASSISTANCE trouble is reported verify that AC power is supplied to the unit test the power supply remove barrel type plug the V 2952 and measure the output voltage with meter Nominal voltage unloaded should measure to 24 Vdc If no voltage is measured replace the in troubleshooting is available from the When calling you should have a VOM and be calling from the job site Call 427 3900 and ask for Technical Support or 540 427 6000 for Valcom 24 hour Automated or visit our website at VP 412A is not field repairable Should repairs necessary attach a tag to the unit clearly stating company name address phone number contact and the nature of the problem Send the unit Inc and Return Dept Hollins Road VA 24019 5056 Manuals Online being used with the V 2952 Tuner Inc warrants its products to be free from defects in materials and workmanship under conditions of normal use and service a period of one year from the date of shipment The obligation under this warranty shall be limited to the replacement repair or of any such defective device within the warranty period provided that LIMITED WARRANTY by Valcom Inc indicates the validity of the claim defect is not the result of damage misuse or negligence after the original shipment product has not been altered in any way or repaired by others and that factory sealed units are unopened A service plus parts and labor will be applied to units defaced or physically damaged charges for the return of products to Valcom are prepaid units of warranty are subject to a service charge The service charge will cover minor repairs Major repairs will be to additional charges for parts and labor warranty is in lieu of and excludes all other warranties expressed or implied and in no event shall Valcom Inc be for any anticipated profits consequential damages loss of time or other losses incurred by the buyer in connection the purchase operation or use of the product warranty specifically excludes damage incurred in shipment In the event a product is received in damaged condition the should be notified immediately Claims for such damage should be filed with the carrier involved in accordance with the point Inc Industry Avenue VA 24013 540 427 3900 540 427 3517 Canada Corporation Van Kirk Drive 11 and 12 Ontario L7A1A5 905 456 1072 905 456 2269 Manuals Online