Wheelock SAFEPATH SPMNS microphone install sheet P85241
File Preview
Click below to download for free
Click below to download for free
File Data
Name | wheelock-safepath-spmns-microphone-install-sheet-p85241-9687035214.pdf |
---|---|
Type | |
Size | 723.15 KB |
Downloads |
Text Preview
Branchport Avenue Branch NJ 07740 631 2148 Thank you for using our products INSTRUCTIONS MNS MICROPHONE FOR USE WITH SPMNS this product according to this instruction manual Please keep this instruction manual for future reference Flush Mount Surface Mount SPMNS MIC SB SPMNS MIC FB NUMBER MNS Microphone is UL Listed under Standard 864 Control Units for Fire Protective Signaling Systems They are Listed for use only The MNS Microphone is designed to be used with Cooper Notification SPMNS SAFEPATH Panel It provides a for making emergency voice announcements from the SPMNS panel Only 1 MNS Microphone can be connected to the panel The hand held push to talk microphone is supervised to ensure proper connection It is not repairable If it is from the unit the unit must be returned for repair All CAUTIONS and WARNINGS are identified by the symbol All warnings are printed in bold capital letters PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT FAILURE TO COMPLY ANY OF THE FOLLOWING INSTRUCTIONS CAUTIONS AND WARNINGS COULD RESULT IN IMPROPER INSTALLATION AND OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION WHICH RESULT IN PROPERTY DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND OR OTHERS Input Voltage Output Level Impedance Ground Fault Current Temperature H x W x D H x W x D RMS Ohms Ohms 23mA Alarm 30mA to 49C 32 to 120F Front 9 x 14 1 2 x 3 1 2 in Front 10 x 15 1 2 x 3 1 2 in DIAGRAM 1 shows the proper wiring connections for connecting the SPMNS MIC to the SPMNS 1 This wiring is power limited All wiring is supervised unless otherwise noted SPECIFICATIONS Size Length Capacitance 0.1uF Total Run 50pF foot for 1000 FT American Wire Gauge AWG Shielded The shield must be connected only at the SPMNS Panel must be adjacent to the SPMNS panel 2015 Cooper Wheelock Inc dba Cooper Notification All rights reserved P85241B 1 of 3 INSTRUCTIONS 2 exploded view surface mount shown 2 shows the proper mounting requirements for the SPMNS MIC Install backbox either flush or surface adjacent to the SPMNS panel Be sure that the mounting box is level Attach the 6 wires as shown in the wiring diagram Figure 1 Be sure to use the specified wire and run the wire through conduit Attach the mounting plate to the box with the 4 screws as shown in Figure 2 INSTRUCTIONS 3 IN LED NAC CC 3 shows the locations of the switches and LED on the SPMNS that require operation during operation and troubleshooting Set switch SW6 NAC CC to the CC position Set the jumper on J4 to the 1V position Remove the jumper on JP4 IF JP4 JUMPER IS NOT REMOVED THE SPMNS WILL NOT BE ABLE TO DETECT ANY MASS MIC TROUBLE 2015 Cooper Wheelock Inc dba Cooper Notification All rights reserved P85241B 2 of 3 4 shows the SPMNS MIC front panel and the location of the LED The green LED indicates there are no faults in the SPMNS MIC The yellow LED indicates a trouble condition has occurred in the The red LED indicates the SPMNS MIC is ready to transmit the live voice of the operator 4 With the mouth one to two inches from the microphone press the microphone push to talk button and speak into the microphone deliver the live audible announcement SHOOTING yellow LED illuminates when there is a problem with the wiring between the SPMNS wiring problems that can occur can be improper wiring reversed on the Audio connections and or CC connections This will provide a trouble condition on the SPMNS panel with the system TROUBLE LED illuminated and the IN Auxiliary LED ON The SPMNS internal sounder will also sound If checking and or correcting problems do not correct the trouble the SPMNS MIC should be replaced MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM COOPER NOTIFICATION MANUALS OR DOCUMENTS DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS OR ANY OTHER USE INCLUDING DESCRIPTION OF THE PRODUCT S APPLICATION OPERATION AND TESTING IS USED AT THE SOLE RISK OF THE USER AND COOPER NOTIFICATION WILL HAVE ANY LIABILITY FOR SUCH USE 2015 Cooper Wheelock Inc dba Cooper Notification All rights reserved P85241B 3 of 3