Autocall Fire Suppression System Abort Switch

Releasing System Peripherals Suppression System Abort Switch listed switches provide a manual fire suppression system release abort request Pushbutton momentary switch is mounted on a blue single gang plate Plate is flame retardant with improved impact and heat resistance A protruding collar protects the switch from accidental contact collar is removable if required Available surface mount Surface mounting includes a red mounting box ULC listed to Standard S527 systems often require abort switches These abort switches are clearly labeled have a visually striking blue plate and combine easy with rugged construction for high integrity operation selection 1 switch 1 Abort switches mount includes red box status listed size includes 3 position contact block housing with one block installed 2 Accessories for field installation Contact Block for Abort Switch 1 Form C contact UL recognized component for use with these switches and approvals are not applicable Additional listings may be applicable contact your local product supplier for the latest status Rev 1 6 2019 Switch One Contact block Switch Information Range Range 3 Electrical ratings contacts 1 N O 1 N C rated 2 A resistive 30 VDC 4 Wiring connections blocks for in out wiring 18 to 14 AWG wire 0.82 mm to 2.08 mm Installation Instructions 5 Environmental ratings to 120 0 to 49 to 93 at 90 32 For flush mounting use a 2 3 4 in deep 70 mm single gang box 2 switch installation reference 2019 Johnson Controls All rights reserved All specifications and other information shown were current as of document revision and are subject to change without notice listings may be applicable contact your local Autocall product supplier for the latest status Listings and approvals under Tyco Fire Security GmbH and the names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm Code are registered of the National Fire Protection Association NFPA Rev 1 6 2019