Cornell Communications Digital Area of Rescue Assistance Flyer

Rescue Refuge Assistance 4800 Area of Rescue Assistance Emergency System for 2012 Life Safety 101 ADA 2010 Stations Per Panel up to Stations now available for way voice communication from station to an Call Center Control Panel shown up to four remote panels and up 35 expansion switches firealarmresources com Switches 35 Optional Descriptions Panels Station Boxes ES 4808 Expansion Switch x 15 W x 4 D Supplies 3.3 Amp Supplied with x 14.25 W x 4.50 D one or 8 Amp Supplied with x 15.75 W x 4.50 D Panel Mandatory Panel Four Optional Stations 255 Max Each for A 4800M A 4800R Control Panels Back Up Power Supply 12Volt 7 Ah Batteries Back Up Power Supply 12Volt 7 Ah Batteries Factory for Mandatory Optional Signage Required Area of Rescue Refuge x 20 W x 20 W x 4 W x 3.5 D x 18 W x 3.25 D provide supervised 4800 Digital Emergency Communication System is voice between each Call Station and the Main Panel Optionally up to 4 Remote Control Panels also be installed throughout the building to allow locations to respond to a call for assistance An modem operating at the Main Control Panel to a public telephone system provides an dial out capability to a monitoring location 4800 Digital Emergency Communication System shall supervise all the Call Stations Control Panels and Switches on a continuous basis to identify line and defective equipment Activated Call Station and fault information will be alerted and displayed the 40 character LCD four line display at each Control location Each 4800 V call station is equipped with an set of form contacts that can be used to external devices such as a camera strobe or tone of Operation and Power Requirements 4800 Digital Emergency Communication System the following three types of wiring Pair 16 AWG stranded non shielded cable from the Supply to the Control Panels and Field Switches a maximum distance of 478 feet Pair 22 AWG stranded non shielded cable from all of the Power Supply to the Power on the Control Panels Cat5e cable Standard straight through TIA EIA 568A TIA EIA 568B from the Control Panel and Field to the Call Station and to the phone line Power Supply operates at 24 VDC with an amperage either 3.3 or 8.0 mode PANEL STATION light signals power on 10 second flash sent from call station light flashes intermittent tone LED light and one time acknowledged activated the control panel on display shows where call originated from red LED light flashes with time tone signal the up down button to remove the to the top line then press the right to call using the handset to talk free voice communication the control panel the calling station call to an offsite to an outside location free voice communication center off fault standby mode LCD display the calls answered LCD displays system fault with a flashing red LED intermittent tone the calling station mode light will be off