Cornell Communications Remote Control Panel A-1600

Remote Control Panel Series Monitor 1000 Series Remote Control Panel A 1600 consists of anodized aluminum face surface flush or desktop mountable green LEDs indicate unarmed status red armed status flashing red with tone an alarm condition Zones are via plastic covered designation strips Anodized aluminum A 1600 panels with integral LED indicators permit remote arming and disarming of individual zones within the Series A 1000 Door Monitor Optional Key Switch for panel control The anodized aluminum faceplate with silk screened designations may be flush surface mounted or desktop mounted with Cornell provided back box Specifications The contractor shall furnish and install CORNELL A 1600 Remote panels as indicated on the plans for use with the Series A 1000 Door Monitor System flush surface desktop mountable panel shall accommodate zone circuits Indicators be LEDs incandescent lamps are not acceptable A steady green LED shall indicate status steady red armed status flashing red with intermittent tone an alarm condition volume shall be adjustable via high low switch Zones shall be designated with plastic designation strips Power shall be derived from the A 1000 master panel at 12 VDC Each remote zone indication requires 17MA Information Power Requirements 12VDC Operating Environment 50 120 Indoor Non condensing Mounting Surface Flush or Desktop Wiring 22 AWG Minimum SIZE BOX x 10 W x 13 W x 13 W x 19 W x 9 W x 3 x 12 x 3 x 12 x 3 x 17 W x 3