Cornell Communications Remote Monitor Panel A-1700

Remote Monitor Panel Series Monitor 1000 Series Remote Control Panel A 1700 consists of anodized aluminum face surface flush or desktop mountable green LEDs indicate unarmed status red armed status flashing red with tone an alarm condition Zones are via plastic covered designation strips Used with the CORNELL Series A 1000 Door Monitor Systems A 1700 panels with LEDs permit remote monitoring of individual zones within the system The anodized aluminum faceplate with silk screened designations may be flush surface mounted or desktop mounted with Cornell provided back box Specifications The contractor shall furnish and install CORNELL A 1700 Remote Panels as shown on the plans for use with series A 1000 Door Monitor System Each surface desktop mountable panel shall accommodate zone circuits Indicators shall LEDs incandescent lamps are not acceptable Steady green LED shall indicate unarmed steady red armed status flashing red with intermittent tone and alarm condition Zones be designated with plastic covered designation strips Power shall be derived from the A master panel at 12 volts DC regulated Each remote zone indication requires 17MA Information Power Requirements 12VDC Operating Environment 50 120 Indoor Non condensing Mounting Surface Flush or Desktop Wiring 22 AWG Minimum SIZE x 10 W x 13 W x 13 W x 19 W BOX x 9 W x 3 x 12 x 3 x 12 x 3 x 17 W x 3