Cornell Communications Remote Zone Control Station A-1800

Door Monitor 1000 Series Zone Control Each station features one red and one green LED Arm disarm functions are operable via spring return center off toggle when key switch is in position Stations feature single stainless steel faceplate with silk screened designations They be flush mounted on standard outlet boxes with single gang or surface mounted on Wiremold 5748 or equal with a depth of 1 3 4 A 1800 Remote Zone Control stations provide authorized with access to doors controlled by the Series A 1000 Door System Arm and disarm functions are manually controlled via switch and key Tone option available on two gang plate The satin finish stainless steel faceplate with silk screened designations may be mounted on a standard outlet box with single gang plaster ring or surface mounted on a 5748 or equivalent Specifications The contractor shall install CORNELL A 1800 Zone Control for authorized access to individual doors in the Series A 1000 Door Monitor System single gang stainless steel station suitable for flush surface mounting shall feature a red a green LED with green indicating unarmed status red indicating armed and flashing red alarm condition Key switch and spring return center off toggle switch shall be with arm and disarm functions controllable only when key switch is in position shall be supplied via the Series A 1000 master panel at 12 volts DC regulated Current is per station Information Power Requirements 12VDC Operating Environment 50 120 Indoor Non condensing Physical Faceplate Dimensions 4 x 2 1 Gang Mounting Single Gang back box with 1 minimum depth Wiring Terminations are Pigtailed in 1 6 gang sizes For correct part number change first number 1 to gang size needed