Cornell Communications Staff Station S-111, S-112

Visual Nurse Call 4000 Dual Single Status Stations and S 112 Staff Station with Tone On Off Switch The Cornell S 111 Staff Station includes an tone switch that can be passed green LED to normal call and red LED to indicate emergency The S 111 Staff station is also furnished with a pull to place a call on the system The S 111 Staff Station has a tone on off that is provided to silence the audible alert by staff calls are indicated with a steady green LED and intermittent tone Emergency calls are indicated with flashing red LED and rapid tone To place calls on system pull cord the station red LED and associated corridor and annunciator panel lights are and a tone sounds at the annunciator panel To cancel slide switch to off position Staff Station The Cornell S 112 Staff Station includes a green LED to indicate normal call and red LED to emergency call It is also furnished with an adjustable volume pot that is preset upon installation S 112 Staff station is also furnished with a pull string to place a call on the system The S 112 Staff Station indicates normal calls with steady green LED and slow intermittent tone calls are indicated with flashing red LED and rapid tone To place calls on the system pull cord station red LED and associated corridor and annunciator panel lights are illuminated and a tone at the annunciator panel To cancel slide switch to off position and S 112 The satin finish stainless steel faceplate with silk screened designations may be flush mounted a standard outlet box with two gang plaster ring or surface mounted on a Wiremold 5748 or equivalent wiring terminations are with screw clamps maximum 16 gauge Specifications The contractor shall furnish and install a CORNELL Clinical Staff Station S 111 S 112 Incoming emergency calls shall be indicated by flashing red LED and rapid intermittent tone normal by steady green LED and slow intermittent tone priority calls via pulsing red LED and pulsing tone lamps are not acceptable Pulling of cord shall illuminate the call placed indicator and corridor and annunciator lights and cause an intermittent tone at the annunciator panel The steel face plate shall have silk screened designations and shall fit on a standard two gang plaster or Wiremold 5748 2 surface box or equal with minimum depth of 1 Field wiring terminations shall be wire screw clamps Information Power Requirements 24VDC Operating Environment 50 120 Indoor Non condensing Physical Faceplate Dimensions 4 x 4 Standard 2 Gang Mounting Two Gang back box with 1 minimum depth Wiring 22 AWG Minimum 16 AWG Maximum in 2 6 gang sizes For correct part number change first number 2 to gang size needed