DSC PC3000 v7 6W - Installation Manual - English - ClassicSeries 16 Zone Alarm Control Panel

INSTALLATION device complies with Parts 15 and 68 of the FCC rules Operation is subject to the following conditions 1 this device may not cause harmful interference and 2 this device must any interference received including interference that may cause undesired operation Reg No F534J3 10411 AL E 0.0B IN CANADA Type RJ31X 7.6W ON UL INSTALLATION equipment is UL listed in accordance with standard UL1023 Household Burglar Alarm System Units UL985 Household Fire Warning Units and UL1635 Digital Alarm Communicator System Units equipment has the capability of being programmed for operational features that are not allowed for UL installations To stay within the standard for household applications the installer should use the following when configuring the system ALL components of the system should be UL listed for the intended application Note elsewhere in this manual for smoke detectors and battery to be used with this equipment If this system is configured for the installer should refer to NFPA Standards 74 for details on locating detectors When the feature is enabled there must be at least one UL recognized indoor Fire Alarm Signalling Appliance Maximum allowed entry time 45 seconds allowed exit time 60 seconds allowed bell cutoff time 4 minutes The Arming feature is not allowed for UL recognized installations The equipment must be configured as a system User bypass must be enabled so that a user code is required to bypass zones The installer should caution the user to NOT give system information to casual users E g Codes bypass etc to baby sitters or home service people Only the use code should be given to the user The installer should advise the user and note in the user manual Service organization name and telephone number The programmed exit time The programmed entry time Remote programming must be disabled OF CONTENTS 1 2 Range Radio Operation 3 1 Radio Only Operation 3 2 Radio with Land Line Communication 3 4 Testing 4 Panel 4 Procedure 4 Connections 5 for Smoke Detector Location 7 Functions 8 8 Code 8 Programming Code 8 8 8 Arming 8 Bypassing Q 1 or Q 1 Access Code 8 Display Q 2 9 Memory Display Q 3 9 Auxiliary Supply Control Q Hold Down 4 9 Programming Commands Q 5 Master Code 10 Functions Command Q 6 Master Code 10 Test Q 6 Master Code 0 11 the Clock Q 6 Master Code 1 11 Time of Day Q 6 Master Code 2 11 Arm Q 6 Master Code 4 11 Enable Q 6 Master Code 5 11 Chime Q 6 Master Code 6 11 Test Q 6 Master Code 8 11 Callup Q 6 Master Code 9 11 Programming Commands Q 8 Installer Code 12 Home Arming Q 9 Access Code 12 Arm Command Q 0 12 Exit Q 0 when armed 12 Zones 12 13 Guide 14 14 Programmed Data 14 Binary Programming 14 1st Phone Number 14 1st Account Code 15 2nd Phone Number 15 2nd Account Code 15 Codes Explanation 15 Alarm Reporting Codes Zones 1 to 8 15 Alarm Reporting Codes Zones 9 to 16 15 Restoral Reporting Codes Zones 1 to 8 15 Restoral Reporting Codes Zones 9 to 16 16 Utility Alarm Reporting Codes 16 Utility Restoral Reporting Codes 16 Reporting Codes for Closing Arming via Access Codes 1 to 8 16 Reporting Codes for Closing Arming via Access Codes 9 to 16 16 Reporting Codes for Opening Disarming via Access Codes 1 to 8 16 Reporting Codes for Opening Disarming via Access Codes 9 to 16 16 Reporting Codes for Miscellaneous Functions 17 Zone Definitions for Zones 1 to 8 17 Zone Definitions for Zones 9 to 16 18 1st System Option Code 18 2nd System Option Code 18 Zones 1 to 8 Bypass Mask 18 Zones 9 to 16 Bypass Mask 18 System Times 19 System Clock Times 19 New Installer Code 19 New Master Code Access Code Number 1 19 Downloading Access Code 19 Communicator Format Options 19 Programmable Input Options 20 30 31 32 Split Arming 21 Call Direction Options 21 Software Reset EEPROM Memory to Factory Defaults 21 Through 42 Reserved for Future Use 22 Access Bypass Mask Codes 1 to 8 22 Access Bypass Mask Codes 9 to 16 22 Miscellaneous Function Reporting Codes 22 Downloading Computer Telephone Number 22 Modem Configuration 22 Panel Identification Code 22 Periodic Function Enable Disable 22 3rd System Option Code 22 Delay Before Transmission 23 Long Range Radio Account Code 23 Long Range Radio Installer Test Mode 23 Installer Lockout Enable 23 Installer Lockout Disable 23 for the Record 24 Work Sheets 25 Diagrams 36 Warranty 38