Fike P 1 01 01 25 50 100 Voice Evacuation Systems

File Preview
File Preview
Click below to download for free

File Data

Name fike-p-1-01-01-25-50-100-voice-evacuation-systems-1456392087.pdf
Type PDF
Size 655.10 KB

Text Preview

FIKE 25 50 100 VOICE EVACUATION SYSTEMS Fike 25 50 100 Voice Evacuation System operates with any Fire Control Panel FACP and provides 25 50 100 Watts of power Fike 25 50 100 Voice Evacuation System includes all necessary to provide an effective voice evacuation system With the of zone splitters remote microphone panels and expander the Fike 25 50 100 Voice Evacuation System can be custom to satisfy the needs of most applications Fike 25 50 100 Voice Evacuation System has its own power and battery charger Panel must be wired with 120 VAC and batteries connected digital message repeater DMR is built into the Fike 25 50 100 Evacuation System The selection of alarm tone and automatic repeats as well as the 6 Hour delay of the AC power failure feature are all field configurable paging microphone is an integral component Removal of the from the panel will cause a condition which be reported locally as well as through the FACP Fike 25 50 100 Voice Evacuation System is housed in an surface or semi flush mounted backbox with a hinged and locked door Digitally Recorded Automatic Evacuation Message Dead front Construction to 4 Minutes of Message Capacity Watt Bullet Proof Amplifier or 70 VRMS Field Selectable VAC Power Supply and Battery Charger Microphone Override of Message and Tone Addressable Compatible High Reliability No Maintenance Fully Supervised Natural Sound Recordings Works with 12VDC or 24VDC Fire Alarm Panels Works with Analog Addressable and Microprocessor in Alarm and Alert Signals to 4 Minute Message Capacity Installation and Operation Fire Alarm Panels Minute Message Restart on Microphone Key Hour Backup with two 12V 7AHr Batteries Made in the USA Listed S5661 MEA 24 041 277 96 E pending pending 24 041 6911 1446 100 pending S 10th Street P O Box 610 Blue Springs Missouri 64013 0610 U S A 816 229 3405 816 229 4615 www fike com No P 1.01.01 INSTALLATION Message 15 seconds Please there has been a report of emergency Proceed calmly to the exit and leave the building Do not use the elevators use where necessary All handicapped shall use the building plan SPECIFICATIONS voice evacuation system shall be Fike 25 50 100 Voice Evacuation System or approved equal voice evacuation system shall provide 25 50 100 watts signal power and 25 50 100 watts voice power and shall be listed All speaker circuits shall be field selectable for 25 or 70 Vrms operation and shall be power limited voice evacuation system shall be micro processor based and shall contain an integral microphone 25 50 100 watt amplifier tone generator digital message repeater 120VAC power supply and battery charger voice evacuation message signal shall be broadcast until the Fire Alarm Control Panel FACP is reset or until fire personnel interrupt the broadcast with a manual page On reset system shall automatically return to standby operating condition secondary message shall be provided which can be triggered by the closure of a contact from either the FACP or from normally open contact device paging microphone s will be supported by the system through a supervised circuit Remote microphone s may mounted up to 5000 feet away from the voice evacuation panel CHARACTERISTICS Power VDC Battery Power Dim 25 0.8A 50 0.6A 100 2A Standby 1.00A Alarm Watts 25 70 VRMS Standby 1.0A Alarm Watts 25 70 VRMS Standby 2.5A Alarm Watts 25 70 VRMS and Voice x 18 x 4 w h d and Voice x 18 x 4 w h d and Voice x 18 x 4 w h d Fike Corporation All Rights Reserved No P 1.01.01 July 2005 Specifications are subject to change without notice

Related Files