Fike Selectable Output Wall Speaker Strobes P 1 55 01

SELECTABLE OUTPUT WALL SPEAKER STROBES Selectable Output Speaker Strobes manufactured by System Sensor offer features that include the widest range of candela options available and capability to recognize and self adjust for either 12 or 24 volt operation along the fidelity sound quality expected from Fike speaker technology Selectable Output Strobe speaker strobe offers average current draws that not only lower than conventional fixed candela products but also lower than selectable candela products In addition the broad frequency response and low harmonic distortion provided by Fike speaker technology provides accurate and intelligible broadcast of evacuation messages Selectable Output Speaker Strobes offer a variety of installation friendly such as the ability to mount to a 4 x 4 x 2 1 8 back box without the for an extension ring and with no encroachment into the box Also with the strobe the speaker strobe may be either left or right mounted to potential obstructions Selectable Output Speaker Strobes offer the broadest range of candela In addition the Selectable Output Strobes and horn strobes can operate either 12V or 24V with no setting required the device recognizes and self to the correct current automatically The speaker voltage either 25.0 or and power tap settings either 1 4 1 2 1 or 2 watt are field selectable models 20 130 144 and 20 130 145 incorporate a new patent voltage booster design that has a more consistent flash bulb voltage over range of candela selections providing you a high quality strobe device Selectable Output Speaker Strobes incorporate the same stylish low profile of the conventional Fike products for a consistent and aesthetically appearance across the entire product line FEATURES SPECIFICATIONS Combines Fike Selectable Output Strobe and FWR unfiltered SP200 speaker technology Operates on either 12V or 24V Widest range of candela options 12V 15 and 15 75 24V 15 15 75 30 75 and 110 Easy candela selection 25.0 and 70.7 volt speaker with four power taps Field reversible strobe for left or right Synchronizable with MDL Module Optional surface mount back box skirt Dimensions 4 7 8 x 8 1 4 x 2 1 4 Mounting 4 x 4 x 2 1 8 back box Indoor Operating Temperature 32 to 0 to 49 Strobe Operating Voltage 12 or 24 Input Terminals 12 to 18 AWG Operating Voltage Range 12V 24V 16 Operating Voltage Range w Sync Circuit 12V 9 24V 17 Specifications Input Voltage 25.0 or 70.7 Vrms Input Terminals 12 to 18 AWG Frequency Range 400 to 4000 Hz The is UL listed from 400 to 4000Hz will provide an output from 100 to Hz Power Taps 1 4 1 2 1 and 2 watts U S Patent No 6,049,446 These products should be operated within their voltage range UL does however test integrity to and 10 of stated ranges CSFM 73005 1209 186 MEA Approved 127 02 E UL S4048 Output UL Reverberant dBA 10 ft Watts Watt Watt Output UL Anechoic dBA Watts ft Watt Watt S 10th Street P O Box 610 Blue Springs Missouri 64013 0610 U S A 816 229 3405 816 229 0314 www fike com MODELS Model No Model No Operating Strobe mA Operating Current Strobe mA RMS 20 130 145 Box Skirt BBS SP2R Strobe Feature the strobe screw and lifting the strobe assembly out of the rib slot allows the strobe to be rotated 180 remounted to the base resulting in a left mounted configuration B AND ENGINEERING SPECIFICATIONS shall be a System Sensor Model listed to UL1480 and UL 1971 and be approved for fire signaling systems Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms and shall have a frequency of 400 4000 Hz Speaker shall have power taps that are selected by DIP switch The strobe shall consist of a xenon tube with associated lens reflector system and operate on either 12V or 24V The strobe shall also feature selectable output providing options for 15 or 15 75 candela when operating on 12V and 15 15 75 30 75 or 110 when on 24V The strobe shall comply with the Americans with Disabilities Act requirement for visible signaling flashing at 1 Hz over the strobe entire operating voltage range Fike Corporation All Rights Reserved No P 1.55.01 April 2004 Specifications are subject to change without notice