Fike System Sensor 400 Series High Temp Duct Smoke Detector A05-0953

A Division of Pittway Ohio Avenue St Charles IL 60174 736 7672 Fax 630 377 6495 Sensor DH400ACDCIHT provides a higher range than standard duct detectors for in extreme environments The samples air currents passing through a to provide dependable performance for management fans blowers and air conditioning systems The twist twist out 1451DHHT High Temperature ionization head allows easy removal for quick cleaning and replacement without removing the duct Listings S911 S4011 S2522 S2522 S2522 S3593 Series Smoke Detector Range Range Duct Velocity inches 36.8 cm inches 12.7 cm inches 10.2 cm lbs 2.0 kg to 158 F 0 to 70 C to 93 relative humidity to 4000 ft min or 120 220 VAC Sensor provides system flexibility with a variety of including two remote test stations and several means of visible and audible system As with our duct detectors all duct detector are UL listed Test with Key with Add on Strobe lens option available Test System Sensor 9 97 document is not intended to be used for installation purposes Supply Voltage 29 VDC VAC 50 60 Hz VAC 50 60 Hz VAC 50 60 Hz Ratings DH400ACDCIHT REQUIREMENTS USING NO ACCESSORIES standby current alarm current RATINGS initiation contacts SPST 30 VAC DC 0.6 power factor auxiliary contacts DPDT 30 VDC 250 VAC contacts SPST 32 VDC resistive mA mA mA RMS mA RMS mA RMS mA RMS mA RMS mA RMS Current Loads at 24 VDC MAX MAX MAX MAX MAX MAX When initiating an alarm the RTS451 and RTS451KEY require 103mA in alarm Nominal current is 0mA Alarm current is 8 mA maximum when test magnet is removed NOTE Accessories are only rated to 120 and must be installed indoors COMBINATION OF ACCESSORIES MAY BE SUCH THAT THE GIVEN CURRENT LOADS TOTAL OR LESS IN THE STANDBY STATE OR LESS IN THE ALARM STATE Specifications air duct smoke detector shall be a System Sensor DH400ACDCIHT Series Duct Smoke Detector The shall be UL listed per UL 268A standard for Detectors for Duct Applications specifically for use air handling systems The detector shall operate at air from 500 feet per minute to 4000 feet per The detector shall have an operating temperature of 32 to 158 The detector housing shall be with an integral mounting base capable of ionization detector heads It shall be of local testing via magnetic switch or remote using the RTS451KEY or RTS451 Remote Test Information No ionization high temperature duct detector ionization high temperature head sampling tube duct widths 1 sampling tube duct widths 2 sampling tube duct widths 4 sampling tube duct widths 8 cap for metal sampling tubes with piezo alarm and power test station with key The duct detector housing shall incorporate an smoke chamber in compliance with UL 268A The shall be capable of mounting to rectangular or ducts up to 12 wide without adapter brackets An filter system shall be included to reduce dust and effects on detector and housing thereby reducing and servicing Sampling tubes shall be after the housing is mounted to the duct by through the duct housing Terminal connections be of the strip and clamp method suitable for 14 wiring test station sounder annunciator alarm LED cover removal tool air filters per package test module magnet replacement screen installation kit hardware Sensor Worldwide Manufacturing Distribution Canada 905 812 0767 905 812 0771 Italy 39 40 9490 111 39 40 382137 the Far East 852 2191 9003 852 2736 6580 China 852 2191 9003 852 2736 6580 2 India 91 022 8202564 the United Kingdom 44 1403 276500 44 1403 276501