Fike Voice Evac Module P 1 04 01

Architect and Engineer Specification 50 or 100 Watt Voice Evacuation Modules Microphone Whoop Alarm Tone Built In Power Regulator with Battery Charger or 70 VRMS Operation Field Selectable no additional parts required Convert any Fire Alarm System to Voice mounting into any UL Listed backbox Digital Message Repeater built in Fike voice evacuation modules provide an easy and way to convert any UL Listed fire alarm or system to an automatic voice evacuation Part Number 24 060 24 061 and 24 062 include a for manual paging a digital message built in power supply and battery charger The are fitted with an cover plate to protect circuitry Part Number 24 060 24 061 and 24 062 include of the operational features and characteristics of the 24 044 and 24 047 Voice Evacuation Panel but provided without the backbox power can be supplied by the Fire Alarm Control FACP or by the 24 086 or 24 083 Power ordered separately of the Fike voice evacuation accessories including microphones may be used with the Fike voice modules evacuation expander modules can also be added any combination to provide up to 2000 Watts of audio in a single voice evacuation system installation EVACUATION 25 watt 50 watt 100 watt 24 060 Voice Evacuation Module pending on modules Information Module Systems Evacuation Module with Audio Amplifier with Temporal Pattern Power Supply Battery Charger Paging Microphone order transformer separately Voice Evacuation Expander Module Voice Evacuation Expander Module Voice Evacuation Expander Module Transformer Open Frame 28 VAC 100 VA Transformer Open Frame 28 VAC 180 VA 2003 Issue S 10th Street P O Box 610 cid 127 Blue Springs Missouri 64013 0610 U S A cid 127 816 229 3405 cid 127 Fax 816 229 0314 cid 127 www fike com Installation VAC Power Supply is with Voice Modules Speaker Circuit Power Limited Transformer needed is ordered will operate 24 30V AC DC used with 24 VDC supply must its own back up Status LEDs B circuit shown wires to panel for A operation Dimensions 5 8 3 4 5 6 7 8 3 4 5 6 7 8 V V Characteristics Part Power Current Output Number 24 30V 1.00A Alarm 25 Watts AC DC 0.18 Standby 24 30V 1.00A Alarm 50 Watts AC DC 0.15 Standby 24 30V 2.50A Alarm 100 Watts AC DC 0.18 Standby ALL Output Ratings are for either 25 or 70 Volts RMS for both TONE and VOICE signals 1.0 A average current draw in alarm 2.9A peak 24VDC 1.0 A average current draw in alarm 3.4A peak 24VDC 2.5 A average current draw in alarm 6.4A peak 24VDC Fike Corporation All rights reserved No are subject change without notice