Gamewell-FCI AMM-2 Monitor Module

AMM 2 MONITOR MODULE Compact Size Allows Easy Installation Class B Style B Initiating Circuit 1,200 Ohm Line Resistance for Initiating Circuit Accommodates any N O Dry Contact Device Addressable Monitor Module AMM 2 features a single B Class B initiating circuit with end of line resistor This provides an address for any device or group of devices to this circuit Any alarm initiating devices with nor open N O dry contacts such as heat detectors heat detection devices projected beam smoke detectors smoke detectors water flow switches tamper switches stations etc may be installed in this circuit AMM 2 module is designed for installation in the signal line circuit of any FCI analog addressable control panel signaling line circuits of FCI analog addressable panels are to accommodate up to 99 monitor modules per circuit initiating circuit of the AMM 2 has a maximum line resis of 1,200 ohms allowing the module to accommodate a number of initiating devices located at consider distances from the module compact size facilitates the installation of the module in manual stations or mounting boxes of various types of initiating devices APPROVALS 427 91 E Vol III INFORMATION current current temperature humidity amp amp to 120o F 0 to 49o C to 93 non condensing H x 2.75 W x 0.5 D 3.3 x 5.5 x 1.25 cm INFORMATION Number Model Monitor Module Single circuit Style B Class B are provided for information only are not intended to be used for installation purposes and are believed to be accurate However no responsibility is assumed Fire Control Instruments Inc for their use Specifications subject to change without notice All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.0