Gamewell-FCI AMM-2I Dual Monitor Module

AMM 2I DUAL MONITOR MODULE Compact Size Allows Easy Two Class B Style B Initiating 1,200 Ohm Line Resistance for Initiating Circuit Addressable Dual Monitor Module AMM 2I features two Style B Class B initiating circuits each with end of line This module provides addresses for any device or group devices connected to each circuit Any alarm initiating de with normally open N O dry contacts such as heat linear heat detection devices projected beam smoke 4 wire smoke detectors water flow switches tamper manual stations etc may be installed in these cir initiating circuits each have a maximum line resistance of ohms allowing the AMM 2I to accommodate a substan number of initiating devices located at considerable dis from the module compact size facilitates the installation of the module manual stations or mounting boxes of various types of initiating devices first circuit address is set via a rotary switch The second is automatically assigned a higher address The module a single panel controlled red LED AMM 2I module is designed for installation in the signal line circuit of any FCI analog addressable control panel circuits are designed to accommodate up to 99 monitor per circuit APPROVALS INFORMATION current current temperature humidity amp amp to 120o F 0 to 49o C to 93 non condensing H x 2.75 W x 0.5 D 3.3 x 5.5 x 1.25 cm INFORMATION Number Model Module Two circuit Style B Class B are provided for information only are not intended to be used for installation purposes and are believed to be accurate However no responsibility is assumed Fire Control Instruments Inc for their use Specifications subject to change without notice All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.0