Gamewell-FCI FML-E3 FSL-E3 Fiber Module

Analog and Networking Systems Loop Modules Gamewell FCI FML E3 Fiber Optic Multi Mode and FSL E3 Fiber Optic are plug in fiber loop modules used for fiber optic networking with the Network Repeater The two types of fiber option modules are used as channel to transmit or receive communications with the RPT E3 UTP Network and or the INI VG Series voice gateway for the ARCNET communication of the E3 Series System following describe the two types of fiber option modules The FML E3 is a fiber module that allows the multi mode fiber to network between It features the ST style connectors with a maximum attenuation of 8db with micrometer cable The FSL E3 is a fiber module that allows the single mode fiber to network between It features the LC style connectors with a maximum attenuation of 30db 9 125 micrometer cable fiber loop module can Transmit TX or Receive RX across the fiber optic cable to a supporting E3 Series component Up to two fiber loop cards can be to each supporting E3 Series component and both cards may be combined in same configuration FML E3 FSL E3 modules are designed as a plug in card that can be secured to designated mounting pattern on the RPT E3 UTP circuit board For information on the installation of the FML FSL E3 modules refer to the Installation Instructions P N LS10046 000GF E E3 Series Components Network Repeater Series E3 Voice Gateway Series Information Fiber Loop Module Multi mode fiber single TX or RX channel for RPT E3 UTP Fiber Loop Module Single mode fiber single TX or RX channel for RPT E3 UTP Network Repeater unshielded twisted pair for E3 or S3 optional ML E3 or FSL E3 fiber modules Command Center Voice Gateway Command Center Classic Voice Gateway Transponder Voice Gateway BENEFITS 864 9th Listed per ANSI UL FML E3 features ST FSL E3 features LC connectors with a attenuation 8 dB with 62.5 125 cable connectors with a attenuation 30db with 9 125 cable Offers the option to single and modules the same network Provides a simple plug card installation Technical Specifications ST style type 62.5 125 micrometers Current 0.053 amp Current 0.053 amp LC style Type 9 125 micrometers Current 0.079 amp Current 0.079 amp Temperature 32 to 120 F 0 to 49 C Humidity 0 to 93 non condensing at 90 F C AND HUMIDITY RANGES system meets NFPA requirements for operation at 0 49 120 and at a relative humidity 93 2 noncondensing at 32 2 90 3 the useful life of the system s standby batteries the electronic components may be adversely affected extreme temperature ranges and humidity Therefore is recommended that this system and its peripherals be in an environment with a normal room of 15 27 80 FML E3 FSL E3 are designed to comply with the standard Standard S864 9th Edition Codes International Building Code 2013 2009 2006 2003 2000 Seismic Building Code CBC 2007 Seismic LISTINGS AND APPROVALS listings and approvals apply to the modules in this document In some cases certain or applications may not be listed by cer approval agencies or listing may be in process the factory for the latest listing status Listed S1869 Approved 3025415 Approved Fire Dept of New York COA 6162 7165 1703 0176 of Chicago Class 1 Reference of Certification VMA 45894 02C 9001 Certification a complete listing of all approvals and please visit is a registered of Honeywell Inc is a registered trademark Underwriters Laboratories document is not intended be used for installation We try to keep our information up to and accurate We cannot all specific applications anticipate all requirements specifications are subject to without notice more information more about Gamewell FCI FML E3 FSL E3 and other available by visiting www Gamewell FCI com Gamewell FCI Clintonville Road CT 06472 1610 F 02 19 Honeywell International Inc