Gamewell-FCI ISO-6 Fault Isolator Modules (500 Series)

Addressable Devices Module Six Isolator Module ISO 6 Six Isolator Module is an automatic switch that opens when the line voltage below four volts Isolator modules should be spaced between groups of sensors spaced with modules in a loop to protect the rest of the loop If a short occurs any two isolators then both isolators immediately switch to an open circuit and isolate the devices between them The remaining units on the loop continue fully operate Information Fault Isolator Module Module BENEFITS Provides a removable Unused addresses may Complies with Class A AWG to 18 AWG terminal blocks Displays individual indicators disabled Contains rotary switches Class B operation Includes mounting Mounts up to two in a BB 2 optional Mounts up to six in a BB 6 with CH 6 optional Technical Specifications Specifications Voltage 15 to 32 VDC SLC Wiring Resistance 40 Ohms Range 32 to 120 0 to 49 Humidity 10 to 85 non condensing Gauge 12 to 18 AWG 6.8 5.8 1.25 ISO 6 Current 2.7 mA Current Draw 102 mA BB 2 Enclosure 12 9 3.67 BB 6 Enclosure 24 12.55 6.47 ISO 6 is designed to comply with the following Standard UL 268 9th Edition LISTINGS AND APPROVALS listings and approvals apply to the modules in this document In some cases certain or applications may not be listed by certain agencies or listing may be in process factory for latest listing status S1949 Listed C5669 7300 1653 0160 3012062 2102 9001 Certification a complete listing of all approvals and please visit E3 Series and are registered of Honeywell Inc is a registered trademark Underwriters Laboratories document is not intended be used for installation We try to keep our information up to and accurate We cannot all specific applications anticipate all requirements specifications are subject to without notice 1 displays the BB 6 Enclosure with the CH 6 1 BB 6 Enclosure with CH 6 Chassis AND HUMIDITY RANGES system meets NFPA requirements for operation at 0 49 120 and at a relative humidity 93 2 noncondensing at 32 2 90 3 the useful life of the system s standby batteries the electronic components may be adversely affected extreme temperature ranges and humidity Therefore is recommended that this system and its peripherals be in an environment with a normal room of 15 27 80 more information more about Gamewell FCI ISO 6 and other products by visiting www Gamewell FCI com Gamewell FCI Clintonville Road CT 06472 1610 B 11 17 Honeywell International Inc