Notifier SSM Series Alarm Bells

DN 6910 A1 J 200 Appliances Listings and Approvals listings and approvals apply to the modules specified in document In some cases certain modules or applications not be listed by certain approval agencies or listing may in process Consult factory for latest listing status UL Listed S4011 ULC Listed CS549 MEA Listed 331 01 E FM Approved CSFM 7135 1653 125 Information 6 15.24 cm bell 24 VDC polarized 82 dBA 8 20.32 cm bell 24 VDC polarized 80 dBA Canadian model of 8 bell above 10 25.40 cm bell 24 VDC polarized 81 dBA Weatherproof backbox Series Bells Sensor SSM Series alarm bells are low current notification appliances for use in fire and burglary or other signaling applications They come pre wired reduce installation time and also incorporate a polarized design for use with supervision circuitry reliable performance SSM Series alarm bells provide resonant tones They operate on 24 VDC and are motor Series alarm bells offer simplified installation For indoor SSM Series alarm bells mount to a standard 4 10.16 square electrical box For outdoor applications a WBB backbox is used Approved for indoor or outdoor with WBB backbox use Low current draw High dB output Three sizes available 6 15.24 cm 8 20.32 cm and 25.40 cm diameter 24 VDC models polarized for use with supervision circuitry Bells mount directly to standard 4 10.16 cm square elec box voltage 24 VDC voltage range 116 to 33 VDC Current DC 31.1 mA FWR 53.5 mA temperature range provided with two sets of leads for in out wiring use Fire Alarm General Signaling Burglar Alarm 150 and Architectural shall be a SSM Series alarm bell Bells shall have strikers and operating mechanisms Gongs on bell shall be no smaller than nominal 6 15.24 cm 8 cm or 10 25.40 cm specify size with an operating of 24 VDC Bells shall be suitable for surface or semi mounting Outdoor surface mounted installations shall weatherproof using optional WBB weatherproof backbox bells shall mount to a standard 4 10.16 cm electrical box having a minimum projection of 2.5 cm Bells shall be located as shown on the installation or as determined by the Authority Having Jurisdic Bells shall be Listed for indoor outdoor use by Underwrit Laboratories ULC Canada and the California State Fire and approved by Factory Mutual and MEA 2 9 10 Page 1 of 2 by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 in the U S A 2 of 2 DN 6910 A1 2 9 10