Notifier SWIFT® Intelligent Wireless Detectors

SWIFT Wireless Detectors wireless detectors are intelligent addressable which provide secure reliable communication to Fire Alarm Control Panel FACP across a Class A mesh Wireless detectors create an opportunity for appli where it is costly concrete walls ceilings buried obtrusive surface mount conduit or possibly dan asbestos to use traditional wired devices In addi both wired and wireless devices can be present on the FACP providing an integrated wired wireless solution increased installation potential SWIFT detection line includes a photoelectric Accli standard fixed heat and rate of rise heat detectors photoelectric detectors transmit a digital representation smoke density through a wireless mesh to a gateway and to a FACP The Acclimate detectors combine a photoelec chamber and a 135 fixed temperature heat detector can also transmit an alarm signal due to heat per 521 The fixed heat detector and rate of rise detectors uti sensors designed for open area protection with 50 foot capability as approved by UL 521 sensors offer addressable code wheels and two LEDs LEDs are controlled by the panels Operation modes red green and amber colors with various solid or patterns mesh network within the SWIFT system creates a child relationship between the devices so that each device two parents providing a second path for communications every device If one device can no longer operate for any the rest of the devices can still communicate with other directly or through one or more intermediate SWIFT system also engages frequency hopping to pre system interference whether intentional or accidental Wireless installation Class A mesh network Addressable code wheels Commercial applications UL 268 listed Frequency hopping Bi directional communications OPERATING SPECIFICATIONS 2.4 inches 61 mm installed in B210W base 6.0 inches 152mm installed in B210W base Weight includes 4 batteries 9.2 oz in B210W base Temperature Range Photo 32 to 120 0 49 Acclimate with Heat 32 to 100 0 to 38 g Detectors Wireless Detector with B210W base Velocity Acclimate with Heat 0 to 4,000 fpm 0 to 20 m Humidity Range 10 to 93 non condensing Ratings Fixed Temperate Set Point 135 Rate of Rise Detection 15 8.3 SPECIFICATIONS Operating Voltage 3.3 VDC Standby Current 210 3.3 VDC one com every 23.9 seconds with LED blink enabled Alarm Current LED on 5 mA 3.3 VDC on Frequency Range 902 928 MHz SPECIFICATIONS Type 4 Panasonic CR123A or 4 Duracell DL 123A Life 2 years Replacement Upon BATTERY LOW or BAT LOW and or during annual maintenance Listings and Approvals device complies with part 15 of the FCC rules meaning is subject to two conditions The device may not cause harmful interference and 2 The must accept any interference received including inter that may cause undesired operation listings and approvals below apply to the basic intelligent detector In some cases certain modules may not listed by certain approval agencies or listing may be in Consult factory for latest listing status Listed S635 7272 0028 0271 7254 0028 0270 Approved ID AUBWFSSD ID 573X WFSSD 9 30 2015 Page 1 of 2 and Codes SWIFT Wireless Intelligent Detectors comply with the UL Standards and with NFPA 72 Fire Alarm System 864 268 Information Wireless photoelectric smoke detector for use the FWSG wireless gateway Wireless Acclimate detector for use the FWSG wireless gateway Wireless fixed temperature 135 F heat for use with the FWSG wireless gateway Wireless for use with the FWSG wireless gateway FlashScan Wireless Gateway 6 wireless mounting base Software interface via USB port for computers the SWIFT Tools programming utility F heat Plus FlashScan NOTIFIER and SWIFT are registered of Honeywell International Inc Microsoft and Windows are trademarks of Microsoft Corporation by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 2 of 2 DN 60832 C 9 30 2015