Notifier SWIFT® Intelligent Wireless Modules

SWIFT Wireless Modules wireless modules are intelligent addressable mod which provide secure reliable communication to the Fire Control Panel FACP across a Class A mesh network modules create an opportunity for applications where is costly concrete walls ceilings buried wires obtrusive mount conduit or possibly dangerous asbestos to traditional wired devices In addition both wired and wire devices can be present on the same FACP providing an wired wireless solution for increased installation mesh network within the SWIFT system creates a child relationship between the devices so that each device two parents providing a second path for communications every device If one device can no longer operate for any the rest of the devices can still communicate with each directly or through one or more intermediate devices SWIFT system also engages frequency hopping to pre system interference whether intentional or accidental SWIFT monitor module is intended for use with a wireless to interface with a device having contacts used to sig status conditions It is designed to provide an interface to devices such as security contacts waterflow switches pull stations The input to the monitor module is non latch and does not require a reset The device has a panel con LED indicator The monitor module must be within 3 of the monitored device when using field wiring or 20 feet non metallic conduit SWIFT relay module allows a compatible control panel to discrete contacts by code command The relay contains isolated set of Form C contacts which operate as a SPDT Circuit connections to the relay are not supervised by module The SWIFT relay module can be used to activate such as a remote power supply in conjunction with a module elevator recall door holders and fan shut of wired devices or SWIFT devices within the same network The module also includes a panel controlled indicator devices communicate across the mesh network through a to the FACP The FACP views the SWIFT wireless and another addressable device on the system provid similar detection functions and outputs as a wired counter In addition both wired and wireless devices can be on the same FACP to meet the needs of a given appli A SWIFT wireless system can use any combination of smoke or heat detectors Wireless installation Class A mesh network Addressable code wheels Commercial applications UL 268 listed Frequency hopping Bi directional communications Wireless Devices Wireless Relay Module Module Specifications OPERATING SPECIFICATIONS Height 4 1 2 inches Width 4 1 2 inches Depth inches Weight includes 4 batteries 7.9 oz 224 g Temperature Range 32 to 120 0 to 49 Humidity Range 10 to 93 non condensing SPECIFICATIONS Operating Voltage 3.3 VDC Operating Current 210 3.9 EOL Current Draw 5 mA LED on Resistance 3.9K Ohms IDC Wiring Resistance 10 Ohms IDC Voltage 3.2 Volts Average IDC Current 5.5 Transmit RF Power 17 dBm Frequency Range 902 928 MHz SPECIFICATIONS Type 4 Panasonic CR123A or 4 Duracell DL 123A Life 2 years Replacement Upon BATTERY LOW or BAT LOW and or during annual maintenance Module Specifications OPERATING SPECIFICATIONS Height 4 1 4 inches Width 4 1 4 inches Depth inches Temperature Range 32 to 120 0 to 49 Humidity Range 10 to 93 non condensing 9 30 2015 Page 1 of 2 and Codes SWIFT Wireless Intelligent Detectors comply with the fol UL Standards and with NFPA 72 Fire Alarm System 864 268 Information Wireless monitor module for use with the FWSG gateway Includes a special cover with a tamper mag built in Recommended for installation in a SMB500 box separately rather than a metal backbox for best per Ships with 4 Panasonic CR123A or 4 Duracell batteries Wireless relay module for use with the FWSG wire gateway Includes a special cover with a tamper mag net in Recommended for installation in an SMB500 box separately rather than a metal backbox for best per Ships with 4 Panasonic CR123A or 4 Duracell batteries FlashScan Wireless Gateway Wireless USB radio antenna dongle that plugs into USB port of a PC running SWIFT Tools Optional surface mount backbox SPECIFICATIONS Operating Voltage 3.3 VDC Operating Current 210 Current Draw 5 mA LED on Transmit RF Power 17 dBm Frequency Range 902 928 MHz SPECIFICATIONS Type 4 Panasonic CR123A or 4 Duracell DL 123A Life 2 years Replacement Upon BATTERY LOW or BAT LOW and or during annual maintenance Contact Ratings A A A A A A A A VAC VDC VDC VDC VAC VDC VAC VAC 0.35 20ms 0.35 0.75 0.35 Listings and Approvals device complies with part 15 of the FCC rules meaning is subject to two conditions The device may not cause harmful interference and 2 The must accept any interference received including inter that may cause undesired operation listings and approvals below apply to the basic intelligent detectors In some cases certain modules may not listed by certain approval agencies or listing may be in pro Consult factory for latest listing status Listed S635 Monitor Module 7300 0028 0273 Approved ID Monitor Module AUBWFSMM and Relay Module ID Monitor Module 573X WFSMM and Relay Module NOTIFIER and SWIFT are registered trademarks of International Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 2 of 2 DN 60829 C 9 30 2015