Potter SFH45-153075 HIGH WATTAGE FIRE ALARM SPEAKER

A Brand SFH45 153075 WATTAGE FIRE ALARM SPEAKER COMBINATION Designed to meet or exceed NFPA ANSI Standards and ADA accessibility guidelines UL Listed for re protective service Field selectable taps from 2 4 and 8 Watts UL Listed for wall or ceiling mount Available in 25V RMS and 70.7V RMS Screw terminals capacity up to AWG12 Frequency range 400 Hz 4000 Hz Two eld selectable settings 15 or 30 cd Polarized strobes with wide listed voltage ranges using ltered or un ltered FWR input voltage Synchronization requires the SMD10 3A Sync Module high quality re alarm speakers are designed to generate attention grabbing tones and voice commands for emergency signaling applications These highly ef cient speakers are available with eld selectable taps from 2 8 Watts The speakers are available two input voltage models 25V RMS and 70.7V RMS and can be installed on a standard 4 electrical back box with an extension ring The Series features a new and exclusive select a strobe The strobe utilized a unique candela intensity eld selector switch for the candela output from 15 to 30 The strobe housing is clearly labeled with lettering and is polarized for connecting to re alarm circuits The strobe is designed with a xenon ash tube and provides a candela intensity eld selector switch for maximum They are available in red or white housing strobe can be synchronized by using the SMD10 3A Sync Module to comply with NFPA recommendations concerning photosensitive when installing two or more visual appliances within the eld of view The strobe signals are listed for indoor use ceiling and wall under UL 1971 Standard Information Number Voltage Voltage Candela Rate Minute or 30 or 30 or 30 or 30 or 30 or 30 or 30 or 30 White White White White Speci cations re alarm speaker shall be capable of reproducing alarm tones or voice commands on 25V RMS or 70.7V RMS Speakers shall provide tap settings of 2 4 or 8 Watts and shall be selected by means of a jumper wire The speaker shall have a frequency range of 400 4000 and shall have an operating temperature between 14 and 140 The speaker shall produce a UL sound pressure level at 10 feet up to 84dB speaker shall be approved for re alarm signaling use The strobe shall be listed under UL 1971 standard for signaling devices for the hearing and shall be approved for re protective service The candela ouput shall be eld selectable having a dual setting of 15 75cd or 30 120cd The signaling strobe shall operate on 24V DC from a non coded regulated DC supply or full wave recti ed un ltered supply It shall be to produce one signal ash per second with continuously applied minimim voltage The SFH45 153075 shall be capable of wall or ceiling The visual signaling devices are to be installed in all non sleeping corridor areas as per plans and speci cations Electric Signal Company 2081 Craig Road St Louis MO 63146 4161 Phone 800 325 3936 Canada 888 882 1833 www pottersignal com IN USA MKT 8850032 REV A 1 OF 2 SFH45 153075 WATTAGE FIRE ALARM SPEAKER COMBINATION 58 184 1 19 32 15 81 1 19 32 15 81 Brand inches mm 58 Diagram PANEL S S NEXT DEVICE END OF LINE Square 2 1 8 Deep Ring 1 1 2 Deep Tap Setting select desired wattage Fig 1 using the change lead wire set the desired output 2 4 and 8 Watt The unit is set at the factory to the 2 Watt position Power Speaker Power MODULE NEXT DEVICE END OF LINE taps are for eld selection Input Voltage V RMS Power Watts Ohms Pressure dB 10ft Response Hz Frequency Cut off Hz Temperature Range 4W 8W 2W 4W 8W 156 1250 120 0 49 avoid electric shock do not attempt install wires when power is on Light RMS Current mA 24V DC 24V DC FWR 83 112 117 155 IN USA MKT 8850032 REV A 2 OF 2