Potter SSX-51 Series 15W Armored Siren or Siren Strobe

A Brand SIREN SIREN STROBE Indoor outdoor 15 watt armored siren 122dB sound output Warble sound output Rust free aluminum die cast Polarized 12VDC input with reverse polarity protection Dual action reed tamper switch Up front screw terminals for easier field wiring Suitable with use for most control panels Mounts directly to the wall or to 4 square back box 60,000 candle power strobe Available strobe lens colors amber blue clear red SSX 51 is a patented indoor outdoor self contained 15 watt armored siren The full featured siren consists of a single tone that delivers warble sound output light weight rust proof aluminum die cast housing a 122 dB output siren driver and a dual action normally open reed switch for normally closed loop The armored siren does not require additional modules metal boxes tamper switches special tools or to install and operate The SSX 51 series comes completely assembled and ready for installation SSX 51S Siren Strobe combination is also available It is a high quality high output siren with a 60,000 candle power strobe with available colors amber blue clear and red SSX 51 series is ideally suited for noisy heavy machinery areas warehouses loading docks print shops busy production floors or for applications where high quality and high output warning is required Circuit Board Holes for Square Box Tone Diaphram Action Reed Switch Aluminum Housing Voltage Voltage Specifications Specifications 12V DC Amps 14.4 V DC DC Amps 14.4V DC 0.3A 12V DC 14 140 60 Contact 100 Electric Signal Co LLC St Louis MO Cust Service 866 240 1870 Tech Support 866 956 1211 Canada 888 882 1833 www pottersignal com MKT 8850064 REV C 1 10 1 OF 2 IN USA SIREN SIREN STROBE 90 147 85.8 123 123 14 5.5 9 Brand inches mm wire wire 1 the housing from back plate 2 the back plate directly to wall or to a 4 square box 3 the housing over the built in to free your hands during wiring WER M PER 4 the siren wires to the strip as indicated above re install the cast iron housing SSX 51S the Red wire from the to the w terminal and Black wire to the terminal the back plate as indicated 5 the cast iron housing sure it aligns properly the back plate before the screws IN USA 8850064 REV C 1 10 2 OF 2