Cerberus Pyrotronics Flexible Discharge Hose FM-200 Extinguishing Systems Flexible Discharge Hose 6011

FM 200TM Extinguishing Systems Discharge Hose ENGINEER AND ARCHITECT SPECIFICATIONS Cylinder to Pipe Wire Braid Reinforced Restriction to Flow Listed Pending Approved Pending FM 200TM System Flexible Discharge Hoses are used to connections between cylinder valves and system or piping They minimize the effects of variations in height of cylinder valve outlets due to dimension necessary in cylinder manufacture and due to irregularities Discharge Hoses are provided in 1 2 and 2 sizes flexible discharge hoses are Unified Thread flare type the valve end and Male NPT on the system side A Valve Adapter must be used to connect to system piping if flexible discharge hose is not used Specifications Flexible Discharge Hoses shall be of the same pipe size the cylinder valves which they serve They shall be wire have a minimum working pressure of 560 psi a minimum burst pressure of 2,250 psi They shall be with the Cerberus Pyrotronics part number and be UL listed and FM approved Information No comes 24 inches comes 31 inches comes 48 inches Weight NUMBER Pyrotronics Ridgedale Avenue Knolls NJ 07927 201 267 1300 201 397 7008 in U S A Pyrotronics East Pearce Street Hill Ontario 1B7 CN 905 764 8384 905 731 9182 1996 sheet dated 9