Siemens BB-55 BB-55R Battery Box, Installation Instructions

Installation Instructions BB 55 and BB 55R Box indoor use only in dry environments Model BB 55 or BB 55R from Siemens Industry is used to house BTX 1 31 AH and BTX 2 55 batteries for the MXL MXLV MXL IQ System The is black and the BB 55R is red backbox can be mounted on a flat surface with user supplied bolts that are a maximum of 3 8 inch diameter FOR WIRING 1 Enclosure in INDUSTRY INC INDUSTRY INC PARK NJ 07932 PARK NJ 07932 BB 55 INSTRUCTIONS INSTRUCTIONS 315 093298 315 093298 in to installation consider the following Weight and size of the enclosure codes Select a clean dry shock and vibration free Position the backbox directly beneath the MXL to which it will be wired lining up the in the BB 55 with the knockouts in the enclosure in in in HOLES in 2 Mounting Holes Position the backbox so that it is clear of and the front door opens freely Mark the locations of the two upper mounting of the backbox on the wall See Figure 2 main AC power line must be turned OFF prior installation Drill the two holes located in the previous step screw in the top bolts leaving a small gap the wall and each top bolt Place the backbox over the two top bolts and it to slide down over the bolts Mark drill and install the two bottom bolts in the in accordance with local codes and NEC 760 Remove the knockouts in the top of the battery and bottom of MXL enclosure for entry of wiring Connect the Battery Wire Assembly to the in the BB 55 If a longer wire is required a minimum of 12 AWG Tighten all four bolts securely against the back of the backbox Place the batteries in the bottom of the BB 55 24 W x 7 D x 11 H Industry Inc Technologies Division Park NJ 315 093298 2 Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada Battery Connections from MXL to BB 55 3 315 093298 2