Siemens FCI2011-U1 NAC Expansion Module, Data Sheet

s Fire Safety System Sheet Safety Security Products Expansion Module FCI2011 U1 AND ENGINEER SPECIFICATIONS Adds notification appliance circuits NACs to Model FC2025 and the Model FC2050 fire control panels FACPs One 1 A or two 2 B NACs Supports horns strobes and horn strobes synchronization Up to 3 Amps load per output Monitors for open line and short circuit conditions UL 864 9th Edition Listed ULC Listed Overview notification appliance circuit NAC module Model FCI2011 U1 is an module that is connected to the boards Models FCI2016 U1 providing additional NACs to 252 and 504 point systems respectively CSFM and NYC Fire Dept Approved 1 A or two 2 B NACs are with the following Desigo systems Model FC2025 Model FC2050 NAC is rated at 3 Amps NAC expansion module which is for open line and short circuit is FM 3010 FDNY 6104 and 7165 0067 0259 Approved programming software is also held in flash erasable programmable read only EEPROM Industry Inc Technologies Division and Humidity Range FCI2011 U1 is UL 864 9th Edition for indoor dry locations within a range of 120 3 49 2 to 0 2 and a relative humidity of at a temperature of 90 3 Documentation Sheet Number Periphery Board FCI2016 U1 Periphery Board FCI2017 U1 for Ordering S54400 A54 A1 NAC Expansion Module Expansion Module 6808 Data current current rating cable cross section FCI2011 U1 Dimensions W x H x D FCI2011 U1 max per circuit max typical for Application nominal terminal blocks 18 American Wire Gauge AWG x 3.23 x 0.71 cm x 8.2 cm x 1.8 cm Lbs 341 g This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www USA Siemens com Desigo Fire Safety in U S A Safety Kenview Boulevard Ontario 5E4 Canada 905 799 9937 905 799 9858 2013 sheet dated 4 12 2