Siemens FHD2012-U1 Inner Door for Remote Terminal Display Module, Installation Instructions

INSTALLATION INSTRUCTIONS FHD2012 U1 Door for Remote Terminal Display Module model FHD2012 U1 Inner Door for Terminal Display Modules from Siemens Industry Inc is used the FHB2001 U1 R1 Backbox The FHD2012 U1 Inner Door has an indentation and opening to allow FT2014 or FT2015 Remote Display Terminal to be installed in the FHB2001 U1 R1 Backbox in order meet the regulatory requirements for Canadian Applications This inner door is black and for indoor use in a dry and protected environment 1 FHD2012 U1 Inner Door for the Remote Terminal Display Module following hardware kit is provided with FHD2012 U1 Philips semi square screws Strap to mount the inner door to the enclosure to ground the inner door with the enclosure the Remote Terminal Display Module on the Inner Door Separate the front panel from the back panel making sure not to damage the ground strap four screws will be reused but disregard the back panel since it is no longer needed Industry Inc Technologies Division Park NJ A6V10385202 a en 2 FHD2012 U1 with RDT Follow the installation instructions of the FT2014 or FT2001 P N A6V10315046 giving on its wiring and electrical requirements the Inner Door Place three of the four 8 32 x 5 16 screws provided in the bottom three holes for the door on the side of the enclosure and tighten them a few turns Slide the inner door into position under the screws Close the door and make certain that the spring loaded fastener fits in the hole on the right side of enclosure Screw down the fastener to secure it in place Place one more 8 32 x 5 16 screw in the top hole and tighten all four screws securely 3 FHD2012 U1 in FHD2001 U1 with FT2014 A6V10385202 a en the Ground Straps ground strap between the two nuts located on the inner door ground strap between the two nuts located on the enclosure 4 Installing the Ground Straps is an inner door that can be used with the FHB2001 U1 R1 backbox only DATA 20 3 8 x 2 1 4 x 13 1 4 A6V10385202 a en page was left intentionally blank A6V10385202 a en A5Q00054386