Siemens FHD2012-U1 Inner Door [used with the Remote Display Terminal] (for Canada), Data Sheet

Cerberus PRO Door used with the Remote Display Terminals Model FHD2012 U1 AND ENGINEER SPECIFICATIONS Sheet Used with the 252 point 504 point fire alarm panels FACPs Model FC922 252 point FIRE only system well as Model FV922 252 point IVC panel Model FC924 504 point fire system well as Model FV922 252 point IVC panel Per ULC holds the Siemens Remote Display with the separate RS interface Model FT2014 U3 R3 or Model FT2015 U3 R3 Model FCA2016 U1 Mounts specifically inside of Siemens 1HU enclosures Model FHB2001 U1 Each inner door is made up of 16 gauge cm 0.06 cold rolled sheet metal Designed manufactured only in black For indoor use only Overview in Canadian installations the Inner Door FHD2012 U1 must be part of the mounting any optional Siemens Model FT201x series display terminal RDT installed in a panel the inner door has the RDT securely attached it Model FHD2012 U1 is subsequently mounted the Model FHB2001 U1 One Height Unit backbox into any of the following Cerberus systems per ULC requirement Up to 252 addressable points Model FC922 for systems Model FV922 for IVC panels Up to 504 addressable points Model FC924 for systems Model FV924 for IVC panels the inner door is specifically designed for protected environments Model FHD2012 U1 for indoor use only The cold rolled sheet composition of each inner door meets regulatory guidelines for Manual Controls PRO Safety Products for infrastructure Door used for Remote Display Terminals Shipment includes one 1 cm ground strap ULC S527 11 Listed ULC S559 04 and ULC 576 Listed FHD2012 U1 has an indentation and opening allows the front end of a Model FT201x series display terminal to securely fit within the back box thus providing tamper proof access to the RDT of each inner door includes one 1 17.8 ground strap that connects from two 2 ring on the outer part of the inner door into two 2 ring lugs fastened to the 1HU enclosure box frame of each inner door contains a cutout for one 1 spring loaded fastener used to lock into the inner door and remote display terminal inner door is designed and manufactured in and is comprised of 16 gauge O 15 cm cold rolled sheet metal Door Bracket Data Material Color 0.15 cm 0.06 sheet metal W x H x D cm x 33.8 cm x 5.8 cm 13.3 x 2.3 Documentation Sheet Number and Equipment UL ULC Display Terminals FT2014 U3 R3 FT2015 U3 R3 and Humidity Range FHD2012 U1 is ULC Listed for indoor locations within a temperature range of 2 120 3 to 0 2 and a humidity of 93 2 a temperature 32 2 for Ordering S54400 C135 A1 Inner Door the Remote Terminal Display The following hardware kit is provided with order of Model FHD2012 U1 Philips semi screws the Model FHD2012 U1 door to the enclosure Strap the Model FHD2012 U1 door with the enclosure denotes the other ground strap is supplied in the ordering of Siemens Model FT201x series Remote Display Terminal Cerberus PRO Canada Limited North Service Road East Oakville Ontario 0H6 Canada 905 465 8000 www USA Siemens com Cerberus PRO The information contained in this data sheet document is intended only as a and is subject to change without notice The devices described here specific instruction sheets that cover various technical limitation and liability of these instruction sheets and the General Product Warning and document which also contains important information are provided the product and are available from the Manufacturer contained in these documents should be consulted before specifying or the product For further information or assistance concerning particular contact the Manufacturer 2016 Supersedes Issue dated 7 2013 1 Technologies Division Fire Safety