Siemens FP2011-U1 FP2012-U1 170-Watt and 300-Watt Power Supplies - Desigo, Data Sheet

Desigo Fire Safety and 300 Watt Power Supplies FP2011 U1 I FP2012 U1 Architect Engineer Specifications 170W Model FP2011 U1 and 300W FP2012 U1 output power to fire and intelligent voice IVC systems Product Overview 170 Watt power supply Model FP2011 U1 and 300 Watt power supply Model provide primary regulated 24VDC nominal power for normal operation Siemens Fire Safety systems Both power supplies are filtered and regulated FP2011 U1 is rated 24VDC nominal at 6.5 Amps and Model FP2012 U1 is 24VDC nominal at 11.5 Amps Model FP2011 U1 is used with Models FC2005 FC2025 and FC2050 FACPs Model FP2012 U1 operates with Models FC2025 and FC2050 FACPs as well as with Models FV2025 and FV2050 IVC panels Model FP2011 U1 used with various fire alarm control panels to 252 504 point addressable or IVC panels can obtain regulated power from power supplies Model Operates with 120VAC or 240VAC Monitors AC power failure and conditions Short circuit or over current UL recognized component UL 864 10th Edition UL 1481 and Listed FM CSFM and NYC Fire Department 170 Watt power supply incorporates a 4.0A non resettable slow blow fuse on the input and includes a built in AC line filter for surge and noise suppression FP2011 U1 mounts in a standard Desigo brand enclosure and there are no parts to be maintained 300 Watt power supply incorporates two 2 6.3A replaceable non resettable fuses on the primary input and includes a built in AC line filter for surge and suppression Model FP2012 U1mounts in a Desigo enclosure and there are no parts to be maintained power supplies are FM 3010 FDNY 6104 and CSFM 7165 0067 0259 Infrastructure Building Products Sheet 6806 usa siemens com fire Diagrams Temperature and Humidity Range FN2001 U1 is UL 864 10th Edition and ULC Listed for indoor dry locations within a temperature range of 120 3 49 to 32 3 0 2 and a relative humidity of 93 2 at a temperature of 90 3 32 2 Properties Data Trouble Monitoring Signal FP2011 U1 In Event Of Input Voltage or Voltage is too low after 60 s earliest Supply Size Design terminals Admissible 18 AWG Wire Gauge W x H x D x 3.88 x 1.75 cm x 9.8 cm x 4.5 cm Weight Lbs 1361g FP2012 U1 W x H x D x 3.88 x 2.5 cm x 9.8 cm x 6.4 cm Weight Lbs 1814g Infrastructure Building Products 2 usa siemens com fire Ratings FP2011 U1 or 240VAC 10 15 60Hz 2.0A Max nominal 6.5A Max Current 6.5A and regulated FP2012 U1 or 240VAC 10 15 60Hz 3.5A Max nominal 11.5A Max Current 11.5A and regulated for Ordering Power Supply Desigo Fire Safety Power Supply Desigo FACPS and systems NOTICE The information contained in this data sheet document is intended only a summary and is subject to change without notice product s described here has have a specific instruction sheet s cover various technical limitation and liability information of install type instruction sheets as well as the General Product and Limitations document which also contains important data provided with the product and are available from the Manufacturer contained in the aforesaid type of documentation should be consulted a fire safety professional before specifying or using the product further questions or assistance concerning problems that might arise relative to the functioning of the equipment please contact Manufacturer Fire Safety Industry Inc Infrastructure Building Products Fernwood Road Florham Park NJ 07932 973 593 260 2021 5