Siemens FP2011-U1 FP2012-U1 170-Watt and 300-Watt Power Supplies - Desigo (for Canada), Data Sheet
File Preview
Click below to download for free
Click below to download for free
File Data
Name | siemens-fp2011-u1-fp2012-u1-170-watt-and-300-watt-power-supplies-desigo-for-canada-data-sheet-9561037284.pdf |
---|---|
Type | |
Size | 1.42 MB |
Downloads |
Text Preview
s Sheet Safety Products Fire Safety System and 300 Watt Power Supplies FP2011 U1 FP2012 U1 AND ENGINEER SPECIFICATIONS 170W Model FP2011 U1 and 300W Model FP2012 U1 power to fire only and intelligent voice IVC systems Model FP2011 U1 used with various fire alarm control panels FACPs The Model FC2025 FC2050 addressable FACP as well as the FV2025 FV2050 IVC panel obtain primary regulated from up to 300W power supplies Model FP2012 U1 Operates with 120VAC or 240VAC Monitors AC power failure and conditions Short circuit or over current protection ULC Listed Overview 170 Watt power supply Model FP2011 U1 and power supply Model FP2012 U1 provide regulated 24VDC nominal power for operation to Siemens Fire Safety systems power supplies are filtered and regulated Model is rated 24VDC nominal at 6.5 Amps and FP2012 U1 is rated 24VDC nominal at 11.5 170 Watt power supply incorporates a 4.0A non slow blow fuse on the primary input and a built in AC line filter for surge and noise Model FP2011 U1 mounts in a standard enclosure and there are no serviceable parts be maintained 300 Watt power supply incorporates two 2 6.3A non resettable slow blow fuses on the input and includes a built in AC line filter for and noise suppression Model FP2012 U1 in a Desigo enclosure and there are no parts to be maintained supply supply and Humidity Range supplies are ULC Listed for indoor dry within a temperature range of 49 2 3 to 0 2 32 3 and a relative of 93 2 at a temperature of 32 2 3 for Ordering Power Supply for Desigo Fire Safety panels S54400 Z60 A1 300 Watt Power Supply FACPs and IVC systems Canada Limited Supplies Desigo 6806C Technical Data Models FP2011 U1 FP2012 U1 Electrical Ratings Trouble In Event Of Design Admissible cross input voltage or input is too low after 60 s earliest terminals 18 AWG Wire Gauge P R O P E R T I E S FP2011 U1 W H D FP2012 U1 W H D FP2011 U1 FP2012 U1 x 3.88 x 1.75 cm x 9.8 cm x 4.5 cm x 3.88 x 2.5 cm x 9.8 cm x 6.4 cm Lbs 1361g Lbs 1814g FP2011 U1 or 240VAC 10 15 2.0A Max nominal 6.5A Max and regulated FP2012 U1 or 240VAC 10 15 3.5A Max nominal 11.5A Max and regulated Diagrams This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Canada Limited www USA Siemens com Desigo Fire Safety Ltd Safety North Service Road Oakville Ontario 0H6 Canada 905 465 8000 www Siemens CA 2015 sheet dated 2 2013 3