Siemens FTS Series FireFighters’ Telephone Stations, Installation Instructions

Installation Instructions FTS Series Telephone Stations FTS Series of FireFighter Telephone Stations from Siemens Industry Inc of the FTS FTS P FTS C FTS CL and FTS PCL models Any of the in the FTS Series can mount into either the FB 300 flush backbox or the FB surface backbox The backboxes are mounted on the wall of the facility in with local mounting codes in locations that provide easy access with terminal 1 on the rear of the FTS telephone assembly and wire it the negative position on the TZC 8B for the selected zone Refer to 1 and 2 and the TZC 8B Installation Instructions P N 315 034110 versions of the FTS CL and the FTS PCL identified by the presence of J1 see 1 have new LED behavior The LED now lights when the telephone circuit is at the command station not when the handset is taken off hook RESISTOR OF OF 1 of FTS Series Telephone Assembly with terminal 2 on the FTS and wire it to the positive position on TZC 8B for the selected zone Refer to Figure 2 and the TZC 8B Installa Instructions P N 315 034110 Industry Industry Industry Inc Inc Inc Industry Inc Industry Inc TTTTTececececechnologies Di Di Di Division Di 315 099450 4 no additional FTS telephones are installed leave the end of line resistor terminals 3 and 4 If there are additional telephones installed on the zone place the resistor on the last phone in the zone Refer to 2 Canada remove all EOLs and use EOL P N 140 0347726 mount using EL 33 When wiring for the phone has been completed secure the field wiring in with the clamp on the rear of the telephone assembly See Figure 1 WARDEN TELEPHONES FTS SERIES TERMINAL FOR PHONE IN ZONE PHONE IN ZONE WARDEN STATION MAY BE ANY OF FOLLOWING MODELS TZC 8B NEG TZC 8B POS OF LINE 1 4W 1 140 383467 2 Series Wiring RATINGS Voltage Current the FTS Series telephone assembly in either the FB 300S flush backbox P N or the FB 301S surface backbox P N 500 624388 as shown in Figure 3 the two 6 32 screws supplied O PT O P 3 the FTS Telephone Assembly CE applications in Cerberus E100 systems refer to Instruction A24205 A334 B844 English or A24205 A334 A844 German Industry Inc Technologies Division Park NJ Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada Geb Co oHG M 315 099450 4