Siemens TRM-306 Six Relay Adder Module, Installation Instructions

TRM 306 Six Relay Adder Module TRM 306 provides six programmable relays It mounts below the TXR 320 main fire alarm board using the 2 provided Before mounting the relay adder module program the relays using the jumpers on the board The located above each relay on the TRM 306 are used to configure the relays The jumpers located below the are used to select either normally open contacts or normally closed contacts The ribbon cable from P1 of the is connected to P6 on the Main Fire Alarm Board 1 TRM 306 Six Relay Adder Module Cable from TRM 306 Relay Adder Module connects to P6 on Main Fire Alarm Board the Relays typical relay circuit is shown below in Figure 2 with the jumper locations and descriptions Relay programming should be done before installing the board into the fire alarm backbox Kenview Blvd Ont L6T 5E4 Industry Inc Fernwood Florham Park 07932 U S A Rev 2 May 2013 2 TRM 306 Relay Programming Specifications Consumption 0 mA 0 mA Kenview Blvd Ont L6T 5E4 Industry Inc Fernwood Florham Park 07932 U S A Rev 1 May 2013